46
KEY SET Setting functions of buttons
KEY LOCK
Makes the function on the remote control buttons invalid.
ON
The function on the remote control buttons, except MEMORY,
PRINT, MONITOR and MEMORY PAGE are not available.
OFF
All buttons on the remote control are available.
MEM&PRN (Memory and Print)
When pressing MEMORY button, the image is automatically
printed after the image is stored in the memory. In case of multi-
image of different scenes, printing will be done after the last image
is stored in memory.
ON
Automatically prints after memorizing.
OFF
MEMORY button functions individually. The image is memorized
without printing.
R1
When a signal inputted through a memory key (pin No. 2) of the
remote terminal on the rear panel is switched to “low” level from
“high” for the first time, a memory image is displayed. Then at the
second time, a source image is displayed without printing the
memory image.
R2
When a signal inputted through a memory key (pin No. 2) of the
remote terminal is switched to “low” level from “high” for the first
time, a memory image is displayed. Then at the second time, a
source image is displayed and the memory image is printed.
MEM&STOP (Memory and Stop)
ON
The image is not overlaid in the memory.
When pressing PRINT or CLEAR button, an image can be overlaid
on the first memory page.
OFF
The next image is overlaid in the memory.
MEM&MONI (Memory and Monitor)
Switches the monitor display between the source image and
memory image after memorizing.
ON
Displays the memory image.
OFF
Displays the source image.
PRN&CLR (Print and Clear)
OFF
The printed memory image is not cleared.
PRN
The printed memory image is cleared.
At continuous printing the memory will be cleared after completing
all the continuous images.
MEM
For multi display setting, when memorizing over the printed page,
the previous image is cleared.
CLEAR KEY
MLT
Pressing CLEAR button on the remote control, the memorized
image being selected is cleared.
PAGE
Pressing CLEAR button on the remote control, images of the
memorized page being selected are cleared.
ALL
Pressing CLEAR button on the remote control, all of the stored
images are cleared.
•
At continuous printing, the memorized images will be cleared according to the setting
of CLEAR KEY after completing printing.
KEEP MONI
Selects the monitor display during printing
ON
Displays the source image after starting printing, when indicating it
before printing. Displays the memory image after starting printing,
when indicating it before printing.
OFF
Displays the source image after starting printing.
ADJUSTMENTS & SETTINGS (SERVICE MENU)
KEY SET
KEY LOCK
: OFF/ON
MEM & PRN
: OFF/ON/R1/R2
MEM & STOP : OFF/ON
MEM & MONI : OFF/ON
PRN & CLR
: OFF/PRN/MEM
CLEAR KEY
: MLT/PAGE/ALL
KEEP MONI
: OFF/ON
CHANGE : OK/CANCEL
Source
Memory
source
Memorizing
Not printing
Display
Remote terminal input
source
Memory
source
Memorizing
Printing
Display
Remote terminal input
R1
R2
