38
COLOR ADJ Colour adjustment
•
The colour of the source image and memorized image can be adjusted.
•
Open this menu also by pressing the COLOR ADJ button on the remote control.
BRT (Bright)
Adjusts brightness of the printing image.
CONT (Contrast)
Adjusts contrast of the printing image.
R-SUB
Adjusts red-subcontrast of the printing image. Red is added with
]
and blue is added with
[
.
G-SUB
Adjusts green-subcontrast of the printing image. Green is added
with
]
and pink is added with
[
.
B-SUB
Adjusts blue-subcontrast of the printing image. Blue is added with
]
and yellow is added with
[
.
CENTER
Initializes each setting in COLOR ADJ. When pressing
]
, the
values of BRT, CONT, R-SUB G-SUB and B-SUB will be reset to 0.
ANALOG ADJ. (Analog Adjust)
Displays the adjusting menu of analog input signal image before
storing in the memory. ANALOG ADJ menu will be displayed with
]
.
2
2
2
2
2
ANALOG ADJ Analog image adjustment
•
This menu is used to adjust the image of analog input signal before storing in the
memory.
•
Open the menu with the
]
button from ANALOG ADJ on the COLOR ADJ menu.
BRT (Bright)
Adjust the brightness of the printing image.
CONT (Contrast)
Adjust the contrast of the printing image.
R-SUB
Adjusts red-subcontrast of the printing image. Red is added with
]
and blue is added with
[
.
B-SUB
Adjusts blue-subcontrast of the printing image. Blue is added with
]
and yellow is added with
[
.
COLOR
Adjusts density of the printing image. The colour of the image gets
deeper with
]
and lighter with
[
.
CENTER
Initializes each setting. When pressing
]
, the values of BRT,
CONT, R-SUB, B-SUB, and COLOR will be reset to 0.
•
When selecting RGB input signal, and COLOR can not be adjusted, nor displayed on
the menu.
•
Select OK on “CHANGE : OK/CANCEL” and press SET button to exit to the ANALOG
ADJ menu and move back onto COLOR ADJ menu.
INPUT Signal selection
INPUT
Selects the signal input through the terminal on the rear panel.
VIDEO
Signal from video signal input terminal
S-VIDEO
Signal from S-video signal input terminal
RGB
Signal from RGB signal input terminal
COLOR ADJ
BRT : 0
CONT : 0
R-SUB : 0 C R
G-SUB : 0 M G
B-SUB : 0 Y B
CENTER : PUSH [
]
]
ANALOG ADJ : PUSH [
]
]
CHANGE: OK/CANCEL
ADJUSTMENTS & SETTINGS (MAIN MENU)
ANALOG ADJ
BRT
: 0
CONT
: 0
R-SUB
: 0 C R
B-SUB
: 0 Y B
COLOR
: 0
CENTER : PUSH [
]
]
CHANGE : OK/CANCEL
INPUT
INPUT
: VIDEO/S-VIDEO/RGB
CHANGE : OK/CANCEL
