8
CONNECTIONS
The functions of this unit can be set by the menu screens displayed on the monitor.
•
Connection with a monitor
•
Connection with VIDEO/S-VIDEO signal equipment
•
Connection with RGB analog signal equipment
•
Connection with RS-232C equipment
Connect this unit with a monitor to check the images to be printed and the images stored in memory.
The following example shows the connection with a video signal, S-video signal and RGB analog signal equipment.
Connect with the necessary signal equipment.
Make sure to turn off the power of the unit and connecting equipment before connection.
CONNECTION WITH A MONITOR
(EXAMPLE)
•
The sync. polarity and sync. signal is set by the menu displayed on LCD.
•
Make sure to turn off the power before setting.
1
1
1
1
1
Press POWER button while pressing MEMORY button on
the front panel.
SERVICE MENU is displayed.
2
2
2
2
2
Press
}
}
}
}
}
button to select SIGNAL SET2 menu.
3
3
3
3
3
Press
]
]
]
]
]
button.
SIGNAL SET2 is displayed. On this menu, the monitor polarity “SYNC”
and output sync. signals, “OUT SYNC”, “RGB SOG OUT” can be set.
NOTE
When the sync. polarity or sync. signal of a monitor to
be connected is not adjusted to the initial setting of this
unit, the image may not be displayed correctly. In this
case, adjust the sync. polarity and sync. signal output
to the monitor.
When the image is displayed correctly, the setting is
not required. (Refer to the operation manual of the
monitor as for the sync. polarity and sync. signal of the
monitor.)
R
G/G+SYNC.
B
H+V-SYNC.
R
G/G+SYNC.
B
H+V-SYNC.
To S-VIDEO OUT terminal
S-VIDEO ( )
To S-VIDEO IN terminal
To VIDEO OUT terminal
VIDEO ( )
To VIDEO IN terminal
To RGB analog OUT
teminals( )
To RGB analog
IN terminals
Monitor
VCP
R G/G+SYNC B H+V-SYNC
IN
OUT
S-VIDEO
AC IN
75
Ω
/
HIGH
75
Ω
HIGH
IMPEDANCE
SYNC
RGB
75
Ω
/
HIGH
75
Ω
HIGH
75
Ω
/
HIGH
75
Ω
75
Ω
75
Ω
75
Ω
HIGH
HIGH
HIGH HIGH
ON OFF
POWER
SCREW
VIDEO
REMOTE
RS-232C
R G/G+SYNC B H+V-SYNC
1
2
