Mitsubishi 7011A SERIES Скачать руководство пользователя страница 8

Страница: 8 / 56

MITSUBISHI ELECTRIC 7011A SERIES UPS

MITSUBISHI
ELECTRIC

7011A SERIES UPS

OWNERS / TECHNICAL MANUAL

Page Number:

vii

CAUTION

PRECAUTIONS FOR INSTALLATION

•

Do not block the intake/exhaust ports. Install the UPS at least 4” (10cm) away from

walls, etc.

-If the intake/exhaust ports are blocked, the internal temperature of the UPS will rise and

could lead to fires from battery electrolyte leakage, fire ignition or part deterioration.

•

Follow the UPS instruction manual carefully when installing the unit.

-Improper installation could lead to injury such as the UPS falling over, etc.

PRECAUTIONS FOR WIRING

•

The power supply for this unit must be single phase rated in accordance with the

equipment data plate. It must be suitably grounded.

-Failure to ground the unit could lead to electrical shocks.

PRECAUTIONS

FOR USE

•

If a unit fault, abnormal odor or noise occurs, turn off the UPS input switch.

-Failure to do so could lead to fires.

•

Do not insert blunt objects or fingers, etc., in the fan.

-Failure to observe this could lead to injuries.

•

Do not insert blunt objects or fingers, etc., into the unit's input/output section.

-Failure to observe this could lead to electrical shocks.

•

Ventilate the UPS surroundings.

-Failure to do so could lead to container rupture or to explosions from the gas generated

from the battery system.

•

Prohibit smoking and the use of fire around the unit.

-Failure to do so could lead to injuries, damage or fires from explosions.

•

Do not place containers that have water or any liquids on the UPS.

-If the container tips over and the water or liquids spills, this could lead to electrical shocks

and to fires in the UPS.

•

Do not sit on, step on or lean on the UPS.

-Failure to observe this could lead to injuries if the UPS tips over.

Содержание 7011A SERIES

























































Результаты поиска

Содержание 7011A SERIES

Отзывы:

Похожие инструкции для 7011A SERIES

Бренды по названию

Популярные бренды

Mitsubishi 7011A SERIES, Руководство технического владельца

Результаты поиска

Содержание 7011A SERIES

Отзывы:

Похожие инструкции для 7011A SERIES

Бренды по названию

Популярные бренды