background image

Combination headlights and dimmer switch

5-142 Features and controls

5

• If the operation mode is put in OFF and

the driver’s door is opened, a high-
pitched constant buzzer will sound to
remind you to turn off the lights.

• If the operation mode is changed to any

mode other than OFF and the driver’s
door is opened, a low-pitched constant
buzzer will sound to remind you to put
the operation mode in OFF.

If the following operation is performed
with the combination headlights and dim-
mer switch in the “

” or “

” position,

the lights automatically turn off after
about 3 minutes.

[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is not opened.

[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is not opened.

If the combination headlights and dimmer
switch is turned to the “

” or “

” posi-

tion again after the engine is turned off, the
about 3-minute auto-cutout function
described above will not work. The lights (the
parking lights, tail lights and license plate
lights) will stay on and will not turn off auto-
matically.

N00549800226

[When using a key to start the engine]
If the driver’s door is opened with the key in
the “OFF” or “ACC” position or removed
from the ignition switch while the lights are
on, the tone will sound to remind you to turn
off the lights.

[When using the F.A.S.T.-key to start the
engine]
If the driver’s door is opened with the opera-
tion mode is put in OFF or ACC, or if the
operation mode is changed to OFF while the
lights are on, the tone will sound to remind
you to turn off the lights.

In either case, the lights will turn off automat-
ically and so will the tone. Or you can turn

NOTE

The light auto-cutout function can be deacti-
vated.
See your authorized Mitsubishi Motors
dealer for details.

When you want to keep the lights 
on: 

NOTE

When the engine is started using the key, if
the driver’s door is opened and the key is
removed, the headlight reminder buzzer
intermittently emits a high-pitched sound. If
the key is still in the ignition switch the key
reminder buzzer intermittently emits a low-
pitched sound.
The buzzer stops when the driver’s door is
closed. (A warning is also displayed in the
multi-information display.)

When the engine is started using the
F.A.S.T.-key, if the driver’s door is opened
and the operation mode is put in OFF, the
headlight reminder buzzer intermittently
emits a high-pitched sound. If the operation
mode is in any mode other than OFF, the
operation mode on reminder buzzer intermit-
tently emits a low-pitched sound.
The buzzer stops when the driver’s door is
closed. (A warning is also displayed in the
multi-information display.)

Headlight reminder buzzer 

NOTE

BK0251800US.book  142 ページ  2017年5月18日 木曜日 午後2時48分

Содержание Outlander Sport 2018


































































































































































































































































































































































Отзывы: