-
4
-
6 FUNCTIONS
Notes (1) This function can be applied to the outdoor units, which are the cooling/heating free multi KXR, GHP-R series or later and PAC.
(2) This function can be applied to the indoor units, which are the model KXE4 or later, and to the remote controller, which is the
model RC-E1 or later.
(3) This enables or disables permiting and prohibiting the individual operation such as RUN/STOP mode and temperature settings of
the remote controller.
No.
Item
1
2
3
4
Operation permitted/
prohibited
(2)
5
6
7
No.
1
2
3
4
5
6
7
8
9
10
(1) Operation, Settings
Carries out batch operation and settings in group units for up to 144 groups. It is necessary that the groups for
which batch operation and settings are carried out be set in advance.
(2) Status monitor
Status monitoring is carried out in block units (only monitored operating state and breakdown), group units or
air conditioner units.
Fix the unit to the SLA3R-BX with the M4 screws.(4 places)
Wire separately the power supply wire and the signal wire for
preventing malfunctions.
Inner wall
40
Electric wires
Beam of building
Fix the SLA3R-BX to the
beam in the building
More than 105mm
Unit
M4 screws, 4 pieces
(accessory of the unit)
Unit
Contents
Item
Contents
Run/Stop
Mode
Set temperature
Fan speeds
Air direction
Filter reset
Starts or stops operation.
Sets COOL, HEAT, DRY, FAN and AUTO
(1)
operation.
Sets the temperature in a range of 18
°
C ~ 30
°
C (in 1
°
C units).
Enables or disables manual operation, enables or disables run/stop operations,
enables or disables mode setting and enables or disables temperature setting.
Sets Hi, Me or Lo fan speed.
Sets auto swing ON or OFF and sets positions 1 ~ 4.
Resets (turns off) the filter sign.
Operating state
Mode
Set temperature
Room temperature
Operation enabled
Fan speeds
Air direction
Filter sign
Maintenance
(Inspections 1, 2 or
backup)
Breakdown
Monitors the operating and stopped state of the air conditioner.
When 1 or more units is running, it shows operation and when all units are
stopped, it shows that operation is stopped.
It shows whether manual operation, the run and stop operation, mode setting
and temperature setting are enabled or disabled of a representative air
conditioner.
Displays the maintenance indicator when the <Inspection 1, 2 or backup>
lights up on 1 or more units. When <Inspection 1, 2 or backup> is off on all
units, the maintenance indicator goes off.
Three are 3 types of inspection, 1, 2 and backup. The display priority order for
these three types is as follows.
Backup > Inspection 1 > Inspection 2
Displays the auto swing ON/OFF setting and position setting for a
representative air conditioner.
Displays the filter sign if the filter sign for one or more units is lighted up.
When the filter sign is off for all units, the monitor's filter sign goes off.
Displays the breakdown indicator when one or more units has broken down.
When all units are normal, the breakdown indicator goes off.
Displays the operation mode of a representative air conditioner.
Displays the set temperature of a representative air conditioner.
Displays the return air temperature of a representative air conditioner.
Displays the fan speed setting for a representative air conditioner.