-
2
-
70
40
240
162
7-inch wide color
LCD touch panel
USB
Upper case mounting
screws(2 screws)
Terminal block
Wall surface
5 INSTALLATION
<Way1>
<Way2>
Opening space
for the installation
Opening space
for the installation
Holes for the unit installaion
Holes for the unit installaion
4-ø6
218
6
6
186
6
6
120
154
99
Inner wall
SLA3R-BX
229
170
198
15.5
15.5
4-ø6
66
120
SLA3R-BX
Inner wall
105
4 EXTERNAL VIEW
Paint color:Pearl white
(a) In case of installing on the control board
1) Please use the control board of the size of 300mm
⳯
400mm
⳯
120mm or larger.
2) Please be sure to lock the control board to protect persons from the electric shock.
3) Please do not use any heat insulation material on the control board.
4) If you use it, accumulated heat will cause the center console to malfunction.
(b) In case of embedding in a wall
Please be sure to use the special box, SLA3R-BX (sold separately) to secure sufficient air circulation space. If the box is
unused, the center console will not work properly because of heat buildup inside the box. Please be sure to use for protecting
persons from the electric shock.Please check that the sufficient space is available in the wall.
When the inside of the wall is divided and have a cavity, please create space more than 0.08m
3
. Refer to the next page.
If there is no partition on the left, right, top and bottom of the center console, please create a space that is 105mm ordeeper.
When you cannot create the sufficient space or thickness of the wall is above 15mm, please install the center console on the
control board.
Before the installation, shut off the power supply to avoid an electric shock.
Please locate or protect so that the unit will not be forced against wiring.
(1) Installation place
Install this unit indoors without the influence of the electromagnetic wave, or splashing such as water and dust.
Necessary clearance is 200mm or more beneath the center console and 500mm or more in front of the center console.
(2) Installation space
Please choose one of two ways.