Mitsubishi Electric XD221U, Руководство по обслуживанию

Страница: 31 / 70

- 8 -
Operating procedure
) Double-click [DLP Composer (TM) Lite .].
The following screen will appear.
) Chose the Edit/Preferences from the menus of DLP
Composer (TM) ,and select the "USB Port" (DDP000/
DDP00) in the item of Communications.
And setup the USB Device Identification under that, as follows
Vendor : 0x89
Product : 0xdfff
And next, click the [Configure], and set the numbers in the
window of USB Configuration as follows
Read Timeout : 0000mSec
Write Timeout : 0000mSec
Reset Delay : 000mSec
Further, in the place of Library, select the Browse and set
the pass of folder which contains the "Flash Device
Parameters .txt" for DDP0.
After set up is completed, push "O.K." in a DLP Composer
Preferences window . And then, close this program
temporary, and start again .
Click here and
add a dot mark.
input 0xdfff
input 0x89
0x89
0xdfff
Click the Browse
input 0000
input 000
input 0000
Click and set the pass
of holder
Click the OK
Click the [Edit]