- 2 -
3. SELECTION OF MODE
There are 2 kinds of modes in the control panel
1) G10
mode
：
Display of setting data for control box like sewing machine direction, sewing machine speed and so on
（
The same display as the XC-G10 control panel
）
2) Control panel
mode
：
Display of backtacking data, program input data, teaching input data and so on.
（
The specific display of the XC-G500 control panel
）
Please select them for your purpose.
（
Factory setting is G10 mode
）
How to change mode
Press the
key while pressing the
key
The previous mode is returned at the same operation.
Note
：
Mode is not changed while the
is lighted on control panel mode.
Press the
key and after the
Is turned of the light, it is possible to change mode.
Please refer to the instruction manual of XC-G or XC-K Series to operate G10 mode.
The control panel mode is described in this technical information as below.
4. KEY NAMES AND FUNCTIONS
Fig. 2 Control Panel Diagram
Keys Related to Start/end backtacking
1
Pattern display area
Displays the pattern number.
Pattern No.
Pattern
1 to 3
Straight lock stitching/Back
tacking/Stitching with fixed stitches
4 Continuous
backtacking
A to H
Programming/teaching
2
3
4
5
Stitch number display area
Displays the stitch number for start, end backtacking and fixed-stitch stitching,
and steps etc.
6
Backtacking stitch number display selection key
Used to change the display at the stitch number display area to the backtacking stitch number. The LED
illuminates when enabled.
7
Stitch number (N) display selection key for fixed-stitch stitching
Used to change the display at the stitch number display area to the stitch number (N) for fixed-stitch stitching.
The LED illuminates when enabled.
1
2
3
4
5
6
7
8
9
10 11 12
13
14
15
16
17
18
19
20
21
22
23
24 25 26
27
28
29
30
31
32
33 34
35
36
37
38
