EN-17
Setting up your projector (continued)
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount
kit designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
t 5IFXBSSBOUZPOUIJTQSPKFDUPSEPFTOPUDPWFSBOZ
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount
kit in an improper location.
t 8IFOVTJOHUIFQSPKFDUPSNPVOUFEPOUIFDFJMJOH
set IMAGE REVERSE in the INSTALLATION menu
to MIRROR INVERT. See page 33.
t 8IFOUIFQSPKFDUPSJTNPVOUFEPOUIFDFJMJOH
images may appear darker than those projected in
the case of tabletop mounting. This isn’t a product
malfunction.
t "TLZPVSJOTUBMMBUJPOTQFDJBMJTUUPQSPWJEFBCSFBLFS
When you do not use the projector, be sure to shut
down the main power by the breaker.
t %POPUJOTUBMMUIFQSPKFDUPSXIFSFUIFFYIBVTUWFOUT
are exposed to air emitted by an air conditioning.
Such installation may cause a breakdown.
t %POPUJOTUBMMUIFQSPKFDUPSOFBSBmSFBMBSN
because it emits hot air from its exhaust vents.
Caution:
t *OTUBMMBUJPONVTUCFEPOFCZBRVBMJmFE
professional.
When the projector is installed on the ceiling using
the ceiling mount kit, it is recommended to hold
the mount kit and the projector using metal bars
or wires in addition to the mount kit fixing screws
to prevent the projector from falling due to an
earthquake or other cause. For that purpose, use
metal bars, wires, or screws that bear a load of at
least 140 kgf. When using metal wires, secure one
end to the adjustment foot of the projector and the
other end to the mount kit. In this case, make sure
that no electrical current is flowing in the mount kit
due to current leakage or other cause.
Rear projection
Ask a specialist for installation. For details, consult
your dealer.
t 'PSSFBSQSPKFDUJPOTFU*."(&3&7&34&JOUIF
INSTALLATION menu to MIRROR. See page 33.
Caution:
t 1MBDJOHUIFQSPKFDUPSEJSFDUMZPOBDBSQFUJNQBJST
ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
ventilation.
t 1MBDFUIFQSPKFDUPSBUMFBTUDN PSJODIFT
away from the wall to prevent the air inlet grille and
the air outlet grilles that emit hot air from being
blocked.
t %POPUVTFUIFQSPKFDUPSJOUIFGPMMPXJOHMPDBUJPOT
and manners, which may cause fire or electric
shock.
t *OBEVTUZPSIVNJEQMBDF
t *OBTJEFXBZTQPTJUJPOPSXJUIUIFMFOTGBDJOH
down.
t /FBSBIFBUFS
t *OBOPJMZTNPLZPSEBNQQMBDFTVDIBTBLJUDIFO
t *OEJSFDUTVOMJHIU
t 8IFSFUIFUFNQFSBUVSFSJTFTIJHITVDIBTJOB
closed car.
t 8IFSFUIFUFNQFSBUVSFJTMPXFSUIBO' PS
$PSIJHIFSUIBO' PS$
t 'PSVTFJOUIF)*()"-5*56%&NPEF
r 8IFSFUIFUFNQFSBUVSFJTMPXFSUIBO'
PS$PSIJHIFSUIBO' PS$
· For use in other than floor installation and
ceiling installation.
t ,FFQGPMJBHFQMBOUTBOEQFUTBXBZGSPNUIF
projector. The temperature around the exhaust
vents and that of the cabinet on the top of the
exhaust vents become high. Take special care for
small children.
Important:
t 8FEPOUSFDPNNFOEVTJOHUIFQSPKFDUPSBUBO
altitude of 2700 meters or higher (When using
the product at an altitude of 1500 to 2700 meters
above the sea level, set the HIGH ALTITUDE MODE
to HIGH ALTITUDE.). Use at an altitude of 2700
meters or higher may affect the projector’s life.
