● OPERATING INSTRUCTIONS ●
En-7
E
CONO COOL OPERATION
Press
during COOL mode
page 5
to start ECO-
NO COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature of airflow. Set temperature is set 4°F (2°C) higher automatically.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the VANE button is
pressed.
What is “ECONO COOL”?
Swing airfl ow (change of airfl ow) makes you feel cooler than stationary airfl ow. So, even
though the set temperature is automatically set at 4°F (2°C) higher, it is possible to perform
cooling operation with keeping comfort. As a result, energy can be saved.
1
Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time is set correctly.
Page 4
2
Press
(Increase) and
(Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
or
is blinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be set together. mark indicates the order of timer operations.
• If power failure occurs while ON/OFF timer is set, see
page 5
“Auto restart function”.
T
IMER OPERATION (ON/OFF TIMER)
JG79Y548H01_01En_AL.indd 7
2018/07/12 10:41:30
