Mitsubishi Electric SRK19CIS, Техническое руководство, Страница: 14 / 65

-
13
-
Models All models
RUN light (green)
• Illuminates during operation.
• Blinks at the ‘CLEAN operation’.
TIMER light (yellow)
Illuminates during TIMER operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
ECONO light (orange)
Illuminates during ECONOMY operation.
4.2 Unit ON/OFF button
When the remote control batteries become weak, or if the remote control is lost or malfunctioning, this button may be used to turn the
unit on and off.
(1) Operation
Push the button once to place the unit in the auto mode. Push it once more to turn the unit off.
(2) Details of operation
The unit will go into the auto mode in which it automatically determines, from room temperature (as detected by sensor),
whether to go into the cooling or dry modes.
Function
Room temperature
Operation mode
setting
Fan speed Flap TIMER switch
Cooling About 24ºC
Dry About 24ºC
Auto Auto Continuous
4.3 Power blackout auto restart function
(1) Power blackout auto restart function is a function that records the operational status of the air-conditioner immediately prior to it
being switched off by a power cut, and then automatically resumes operations at that point after the power has been restored.
(2) The following settings will be cancelled:
(a) TIMER settings
(b) HIGH POWER operations
Notes (1) The power blackout auto restart function is set at on when the air-conditioner is shipped from the
factory. Consult with your dealer if this function needs to be switched off.
(2) When power failure ocurrs, the TIMER setting is cancelled. Once power is resumed, reset the TIMER.
(3) If the jumper wire (J7) “AUTO RESTART” is cut, auto restart is disabled. (See the diagram at right)
Unit ON/OFF button
Jumper wire (J7)
EXTERNAL INPUT
WIRED REMOCON
OPE PERMISSION
CUSTOM
AUTO RESTART
LO TEMP
DIRT PREVENT
COOL ONLY
HI CEIL
PANEL
50/60
Unit indication section
CLEAN operation
ON
3 sec.
1 sec.
OFF