– 12 –
ON-TIMER operation procedure
■
Operation starts 5 to 60 minutes before the time that is set so that the room temperature reaches the optimum temperature at that time.
Page 13
ON-TIMER operation can be set regardless of whether the air-conditioner is running or not.
SLEEP ope ON-TIMER operation procedure
■
Combined timer operation of SLEEP operation and ON TIMER.
Example: When it is desired to stop after 3 hours and then start operation at 8:00, near
the set temperature.
■
SLEEP operation setting
Set by the procedures on page 11.
Set to
■
ON TIMER operation setting
Set by the above mentioned ON TIMER operation procedure.
Set to
The setting of the lighting of the timer light (yellow) of this unit is complete.
h
•
After the SLEEP operation set time has elapsed, the operation stops, and it
starts from 5 to 60 minutes before the ON TIMER’s time.
•
The timer light is not lit at the ON TIMER’s time.
Press the ON TIMER button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
h
•
Operation starts 5 to 60 minutes before the set time.
•
The TIMER light goes out at the set time.
Press within
60 sec.!
1
2
Example: In the case you wish to bring the temperature to nearly set temperature in at 8:00.
Aim the remote control at the air-conditioner.
Press the ON-TIMER button.
ON TIMER indicator
is blinking.
3
Press the “
or
” button.
Each time the
button is pressed, the indicator is switched in the order of:
0:00
0:10
0:20
...
(Units of ten minutes)
1:00
1:10
Each time the
button is pressed, the indicator is switched in the order of:
0:00
23:50
23:40
...
(Units of ten minutes)
23:00
22:50
Set at 8:00.
Changing of set time
Set a new time by using the ON-TIMER button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
Changing of set time
Set a new time by using the SLEEP or ON TIMER button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
RKW012A211_Eng.p65
10/4/05, 9:35 AM
12
Black
