background image

– 11 –

No indication

(cancelled)

... (Units of one hour)

If this is pressed while the unit is off

SLEEP operation starts with the previous operation settings, and the air conditioning is
turned off after the time that has been set passes.

If this is pressed while the unit is running

Each time the button is pressed, the indication changes as follows:

Example: You wish it to stop after 7 hours.

Set to 

The timer light (yellow) is on.

h

The unit stops at the end of the set period of time.

OFF-TIMER operation procedure

2

3

The unit stops automatically at the end of the set period of time. If it is stopped, perform the operations starting with STEP 1 and if running start with STEP 2.

SLEEP operation procedure

The unit stops automatically at the end of the set period of time.
The room temperature is automatically controlled when the set time lapses, so that the room does not become too cold during cooling or too warm

during heating.   

  Page 13

Aim the remote control at the air-conditioner.

Press the SLEEP button.

1

1

1

4

Press the OFF TIMER button.

The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.

h

The unit stops at the end of the set period of time.

Press within

60 sec.!

Changing of set time

Set to a new time by using SLEEP button.

Releasing procedure

Press the CANCEL button to turn off the SLEEP indicator.

Example: You wish it to stop 22:30.
Aim the remote control at the air-conditioner.

If the air-conditioner is not operating

Press the ON/OFF button.

Press the OFF TIMER button.

OFF TIMER indicator 

 is blinking.

Press the “

 or 

”  button.

Each time the 

 button is pressed, the indicator is switched in the order of:

0:00

0:10

0:20

...

(Units of ten minutes)

1:00

1:10

Each time the 

 button is pressed, the indicator is switched in the order of:

0:00

23:50

23:40

...

(Units of ten minutes)

23:00

22:50

Set at 22:30.

Changing of set time

Set a new time by using the OFF TIMER button.

Releasing procedure

Press the CANCEL button to turn off the timer indicator.

RKW012A211_Eng.p65

10/4/05, 9:35 AM

11

Black

Содержание SRC71HE-S1
























Отзывы: