background image

-

 

1

 

-

 WARNING

¡

 

Fasten the wiring to the terminal securely and hold the cable securely so as not to apply unexpected 

stress on the terminal.

Loose connection or hold will cause abnormal heat generation or fire.

¡

 

Make sure the power supply is turned off when electric wiring work.

Otherwise, electric shock, malfunction and improper running may occur.

 CAUTION

¡

 

DO NOT install the wireless kit at the following places in order to avoid malfunction.

(1)  Places exposed to direct sunlight

(2)  Places near heat devices

(3)  High humidity places

(4)  Hot surface or cold surface enough to gen-

erate condensation

(5)  Places exposed to oil mist or steam directly

(6)  Uneven surface

(7)  Places affected by the direct airflow of the 

AC unit.

(8)  Places  where  the  receiver  is  influenced  by 

the  fluorescent  lamp  (especially  inverter 

type) or sunlight.

(9)  Places  where  the  receiver  is  affected  by 

infrared  rays  of  any  other  communication 

devices

(10) Places where some object may obstruct the 

communication with the remote controller

¡

 

DO NOT leave the wireless kit without the cover.

In case the cover needs to be detached, protect the receiver with a packaging box or bag in order 

to keep it away from water and dust.

 

Note

¡

 

Instruct the customer how to operate it correctly referring to the instruction manual.

¡

 

For the installation method of the air conditioner itself, refer to the installation manual enclosed in the package.

OPTION PARTS

 

 Wireless kit

Содержание RCN-K-E










Отзывы: