5 - 43 5 - 43
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AS)
5.7.1 Setting the Configuration Data (LPS)
[Purpose]
Used to make the following setting when performing configuration registration
and Storage onto EEPROM.
• (A-slaves) List of Projected Slaves (LPS (For Write))
• (B-slaves) List of Projected Slaves (LPS (For Write))
[Operating procedure]
Monitor/Test screen (A-slaves) LPS (For Write) /
(B-slaves) LPS (For Write)
[Setting screen]
[Operation procedure]
(1) Set the (A-slaves) List of Protected Slaves (LPS (for write)).
Set/monitor the slave numbers you want to register in the (A-slaves) LPS.
(2) Set the (B-slaves) List of Protected Slaves (LPS (for write)).
Set/monitor the slave numbers you want to register in the (B-slaves) LPS.
REMARK
Refer to Section 3.4.2 (14) for details of the setting items.
Downloaded from
