55
English
5.4.7 Confirming the Software Version and Country Setting
Caution:
Ɣ
The software version or country setting cannot be changed.
Step
LCD screen
Procedure
1
SETUP 2
AUTO TEST
VERSIONS
EXIT
The «
SETUP 2
» screen as shown in the LCD screen
at left is displayed.
Ɣ
If VERSIONS have not been set, touch and release
the [SELECT] button and use the « » arrow to
make a selection.
Touch and release the [ENTER] button.
2
SW VERSIONS
CPU:V3.00
DSP:V3.00
COUNTRY
ITALY
The «
SW VERSIONS
» screen as shown in the LCD
screen at left is displayed.
The software (CPU/DSP) version and country setting
can be confirmed here.
Touch and release the [ENTER] button to return to the
«
SETUP 2
» screen (p.47 [5.4.1 Step 8]).
Touch and release the
[ENTER] button once.
Touch and release the
[ENTER] button once.
To «
SETUP 2
»
p.47 Step 8
Software version
Country setting for
the PV inverter
------------->
------------------>
Step
LCD screen
Procedure
11
AUTO TEST
OVR OFR
UVR UFR
PLEASE WAIT
. . .
EXIT
To Step 2
Completion of AUTO TEST mode
The «AUTO TEST» screen as shown in the LCD
screen at left is displayed.
Touch and release the [SELECT] button, and select
EXIT using the « » arrow.
Touch and release the [ENTER] button to return to the
«
SETUP 2
» screen (p. 47 [5.4.1 Step 7]).
Touch and release the [SELECT] button to return to
«AUTO TEST» Step 2.
Caution:
Ɣ
If not able to run AUTO TEST due to not being in grid-connected operation, or if not able to complete AUTO TEST
normally, check that the amount of irradiation is sufficient and that the AC disconnector or GFCI is ON, and then make
the PV inverter run on grid-connected operation. When AUTO TEST is completed, return to the «
SETUP 2
» screen
(p. 47 [5.4.1 Step 7]) once again, and run AUTO TEST.
Touch and release the
[SELECT] button once.
«
SETUP 2
»
Step 7
Touch and release the
[SELECT] button once.
