Mitsubishi Electric PUZ-HA24NHA1, Руководство по установке

Страница: 6 / 36

5
3. Installing the outdoor unit
B
A
C
E
D
D
600 (23-5/8) 600 (23-5/8)
175 (6-57/64)
950 (37-13/32)
25 (63/64)
330 (12-63/64)
370 (14-9/16)
175 (6-57/64)
330 (12-63/64)
600 (23-5/8) 600 (23-5/8)
225 (8-55/64) 225 (8-55/64)
1050 (41-11/32) 370 (14-9/16)
25 (63/64)
• Be sure to install the unit in a sturdy, level surface to prevent rattling noises dur-
ing operation. (Fig. 3-1)
<Foundation specifications>
Foundation bolt M10 (3/8")
Thickness of concrete 120 mm, 4-23/32 inch
Length of bolt 70 mm, 2-3/4 inch
Weight-bearing capacity 320 kg, 264 lbs
• Make sure that the length of the foundation bolt is within 30 mm, 1-3/16 inch of
the bottom surface of the base.
• Secure the base of the unit firmly with four-M10 foundation bolts in sturdy locations.
Installing the outdoor unit
• Do not block the vent. If the vent is blocked, operation will be hindered and break-
down may result.
• In addition to the unit base, use the installation holes on the back of the unit to at-
tach wires, etc., if necessary to install the unit. Use self-tapping screws (ø5 × 15
mm, ø13/16 × 19/32 inch or less) and install on site.
Warning:
• The unit must be securely installed on a structure that can sustain its
weight. If the unit is mounted on an unstable structure, it may fall down and
cause damage or injuries.
• The unit must be installed according to the instructions in order to minimize
the risk of damage from earthquakes, typhoons, or strong winds. An incor-
rectly installed unit may fall down and cause damage or injuries.
■
HA24
■
HA30, HA36, HA42
Fig. 3-1
mm (inch)
mm (inch)
mm (inch)
A
M10(3/8”)bolt
B
Base
C
As long as possible.
D
Vent
E
Set deep in the ground.
Max. 30 (1-3/16)
Min. 10 (13/32)
Min. 25 (1)
Min. 360 (14-11/64)
Min. 475 (18-45/64)
<Pitch of the foundation bolt>
<Pitch of the foundation bolt>
en
BH79D886H09_01en.indd 5 2021/12/24 16:56:41
006