background image

5

2. Installation location

Fig. 2-3

Fig. 2-7

Fig. 2-8

Fig. 2-9

Fig. 2-10

Fig. 2-11

Fig. 2-12

Fig. 2-13

Fig. 2-14

Fig. 2-6

Fig. 2-5

Fig. 2-4

Fig. 2-2

150

300

1000

Max.

 500

200

300

200

1000

150

1000

250

250

1500

500

Max.

 500

300

1500

500

1500

Max.

 300

1500

1500

500

1000

600

2000

150

1500

600

3000

500

1500

800

150

2.4. Ventilation and service space

2.4.1. When installing a single outdoor unit

Minimum dimensions are as follows, except for Max., meaning Maximum dimensions,
indicated.
Refer to the figures for each case.

1

Obstacles at rear only (Fig. 2-2)

2

Obstacles at rear and above only (Fig. 2-3)

Do not install the optional air outlet guides for upward airflow.

3

Obstacles at rear and sides only (Fig. 2-4)

4

 Obstacles at front only (Fig. 2-5)

When using an optional air outlet guide, the clearance is 500 mm or more.

5

 Obstacles at front and rear only (Fig. 2-6)

When using an optional air outlet guide, the clearance is 500 mm or more.

6

 Obstacles at rear, sides, and above only (Fig. 2-7)

Do not install the optional air outlet guides for upward airflow.

2.4.2. When installing multiple outdoor units

Leave 10 mm space or more between the units.

1

 Obstacles at rear only (Fig. 2-8)

2

 Obstacles at rear and above only (Fig. 2-9)

No more than three units must be installed side by side. In addition, leave space as shown.

Do not install the optional air outlet guides for upward airflow.

3

 Obstacles at front only (Fig. 2-10)

When using an optional air outlet guide, the clearance is 1000 mm or more.

4

 Obstacles at front and rear only (Fig. 2-11)

When using an optional air outlet guide, the clearance is 1000 mm or more.

5

 Single parallel unit arrangement (Fig. 2-12)

When using an optional air outlet guide installed for upward airflow, the clearance is 1000
mm or more.

6

 Multiple parallel unit arrangement (Fig. 2-13)

When using an optional air outlet guide installed for upward airflow, the clearance is 1500
mm or more.

7

 Stacked unit arrangement (Fig. 2-14)

The units can be stacked up to two units high.

No more than two stacked units must be installed side by side. In addition, leave space as shown.

Содержание PUMY-P-YHMA














Отзывы: