70
OPERATING PROCEDURE
PHOTOS
13. Removing the receiver
(1) Remove the service panel. (See Photo 1)
(2) Recover refrigerant.
(3) Remove the piping.
(4) Remove the receiver leg fixing screws (2 for top/ 4 × 10),
then slide the receiver upward to remove it.
(The receiver is fixed to the base with a hook on the bottom.)
Note 1: Recover refrigerant without spreading it in the air.
Photo 13
14. Removing the reactor (ACL1, ACL2, ACL3) (Y model only)
(1) Remove the electrical parts box. (See Photo 3-1)
(2) Remove the reactor assy fixing screws (8 for right/ 4 ×
10), then slide the reactor assy upward to remove it.
(3) Remove the reactor fixing screws (4 for front/ 4 × 10) to
remove the reactor on the reactor assy.
Note 1: Pay extra attention when handling the reactor
since it is very heavy (4.1 kg).
Photo 14
Receiver
Receiver leg fixing screws
Reactors
Reactor assy
OCH651
