Mitsubishi Electric PUHZ-P100VHA2, Руководство по обслуживанию

Страница: 71 / 100

71
Function Settings
No.
Mode
No.
Setting
Initial setting (Factory setting)
- : Not available
4-Way
cassette
Ceiling
concealed
Ceiling suspended
Wall
mounted
Floor
standing
PLA-BA(2)
PEAD-EA(2)
PCA-GA(2) PCA-HA PKA-GAL PSA-GA
PEAD-GA PKA-FAL(2)
Filter sign 100Hr 1
2500Hr 07 2
No filter sign indicator 3
Air flow Quiet 1 - - - -
(Fan speed)
Standard 08 2 - - - -
High ceiling 3 - - - -
No.of air outlets 4 directions 1 - - - - -
3 directions 09 2 - - - - -
2 directions
3 - - - - -
Optional high efficiency
Not supported
10
1
- - - -
filter Supported
2
- - - -
Vane setting
No vanes (Vane No.3 setting : PLA-BA only)
1 - - - -
Vane No.1 setting
11 2 - - - -
Vane No.2 setting
3 - - - -
Energy saving air Disabled
12
1
- - - -
flow (Heating mode)
Enabled
2
-
-
-
- - -
Optional humidifier Not supported
13
1
- - - - -
(PLA-BA only)
Supported
2
- - - - -
Vane differential setting No.1 setting (TH5: 24-28 :
)
1 - - -
in heating mode
No.2 setting (Standard, TH5:28-32 :
)
14 2 - - -
(cold wind prevention)
No.3 setting (TH5: 32-38 :
)
3 - - -
Swing Not available Swing
23
1
- - -
Available Wave air flow
2
- - -
Set temperature in heating Available Temperature correction: Valid
24
1
mode (4 deg up)
Not available Temperature correction: Invalid
2
Fan speed when the Extra low 1
heating thermostat is OFF Stop 25 2
Set fan speed
3
Fan speed when the Set fan speed
27
1
cooling thermostat is OFF Stop 2
Detection of abnormality of Available
28
1
the pipe temperature (P8) Not available
2
}
PLA-BA
}
PLA-BA
(2) Functions available when setting the unit number to 01-03 or AL (07 in case of wireless remote controller)
• When setting functions for an indoor unit in an independent system, set the unit number to 01 referring to
4
setting the
indoor unit number of Operating Prodedure.
• When setting functions for a simultaneous- Twin Triple indoor unit system, set the unit number to 01 to 03 for each indoor
unit in case of selecting different functions for each unit referring to
4
setting the indoor unit number of Operating Prodedure.
• When setting the same functions for an entire simultaneous Twin Triple-indoor unit system, set refrigerant address to AL
(07 in case of wireless remote controller) referring to
4
setting the indoor unit number of Operating Prodedure.
OCH415A-3.qxp 08.2.21 8:14 AM Page 71