Mitsubishi Electric PQHRY-P250YHM-A, Справочник данных

Страница: 73 / 116

- 69 -
*1
*2
W k r e t a e h e s a C
W k t u p t u o r o t o M
in.
Control
Circulating water °C
Set Model
Model
connectable Model / Quantity
heating
Model
Total capacity
piping diameter
D.B.
*2
COP
°C
Indoor
Temp. range of
Current input
(Nominal)
mm(in.)
mm(in.)
Power input
Refrigerant
BTU / h
Indoor unit
Temp. range of
*1
h / l a c k ) l a n i m o N ( *1
Power source
kW
cfm
l
Water volume in plate
wate r
HIC circuit (HIC: Heat Inter-Changer)
Heat exchanger
Water pressure Max.
Protection
mm External dimension HxWxD
Type x original charge
) s b l ( g k t h g i e w t e N
MPa
High pressure protection
Inverter circuit (COMP.)
Manufacture
Starting method
L/min
Water flow rate
m
3
/ h
Circulating
Compressor
Accessory
Drawing
distributor
kPa Pressure drop
Operating volume range m
3
/ h
Standard attachment
Document
Wiring
External
*The specification data is
subject to rounding variation.
Unit converter
Lubricant
Type x Quantity
External finish
mm(in.)
Cooling capacity
devices
Compressor
cooling Circulating water
Indoor
Heating capacity
=kW x 860
=kW x 3,412
=m
3
/min x 35.31
=kg / 0.4536
kcal
BTU/h
cfm
lb
Pipe between unit and mm(in.)
Sound pressure level (measured in anechoic room)
dB <A>
W.B.
kW / kW
kcal / h
*2 BTU / h
Power input
kW
P O C kW / kW
kW
Current input
kW
A
A
Optional parts
Refri gerant
Notes:
1.<Standard CITY MULTI indoor unit>
Nominal cooling conditions(subject to JIS B8615-1)
Indoor:27°CDB/19°CWB(81°FDB/66°FWB)
Water temperature:30°C(86°F)
Pipe length:7.5m(24-9/16ft.), Level difference:0m(0ft.)
Brine concentration 0%
2.<PWFY-P100/200VM-E-AU>
Nominal cooling conditions
Circulating water Temp. : 30°C (86°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0m (0ft)
Inlet water Temp 23°C, Water flow rate : 1.93m
3
/h (P100) / 3.86m
3
/h (P200)
Brine concentration 0%
3.<PWFY-P100VM-E-BU>
Nominal heating conditions
Circulating water Temp. : 20°C (68°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0m (0ft)
Inlet water Temp 65°C, Water flow rate 2.15m
3
/h
Brine concentration 0%
Nominal heating conditions(subject to JIS B8615-1)
Indoor:20°CDB(68°FDB)
Water temperature:20°C(68°F)
Pipe length:7.5m(24-9/16ft.), Level difference:0m(0ft.)
Brine concentration 0%
Nominal heating conditions
Circulating water Temp. : 20°C (68°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0m (0ft)
Inlet water Temp 30°C, Water flow rate : 2.15m
3
/h (P100) / 4.30m
3
/h (P200)
Brine concentration 0%
Remarks
●Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred to the Installation Manual.
●Due to continuing improvement, above specifications may be subject to change without notice.
●The ambient temperature of the heat source unit needs to be kept below 40°C D.B.
●The ambient relative humidity of the heat source unit needs to be kept below 80%.
●The heat source unit should not be installed at outdoor.
●Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
●Be sure to provide interlocking for the unit operation and water circuit.
●The heat source twinning kit(low pressure) should be connected to the low pressure side of the heat source unit.
If the connected units are of different capacities, the heat source twinning kit(low pressure) should be installed in the unit with the largest capacity.
●Add brine to circulating water when a unit is operating at water temperature below 10°C.
●Turn DipSW 3-9 ON before power ON.
●Twinning kit is required.
0 7 . 4
24.7-23.4-22.6
4.63
-5.0~45.0°C(23~113°F)
69.0
15.0~24.0°C(59~75°F)
Main BC controller: CMB-P108,1010,1013,1016V-GA
17
52.5
15.0~27.0°C(59~81°F)
50~150 % of heat source unit capacity
P15~P250 / 2~50 (Connectable branch pipe number is max. 48.)
-5.0~45.0°C(23~113°F)
235,400
PQRY-P250YHM-A(For Ground source)
14.65
181(400)
KB94T147
R410A x 5.0kg (12lbs)
e p y t e t a l p e p y t e t a l p
-
17
28.58(1-1/8) Brazed
28.58(1-1/8) Brazed
PQRY-P300YHM-A(For Ground source)
4.5 + 4.5 ~ 7.2 + 7.2
R410A x 5.0kg (12lbs)
Indoor LEV and BC controller
1,160(1,100 without legs) x 880 x 550
45-11/16(43-5/16 without legs) x 34-11/16 x 21-11/16
19.05(3/4) Brazed
Refrigerant conn. pipe
19.05(3/4) Brazed
KE94C302
Joint: CMY-Y102S-G2,CMY-Y102L-G2,CMY-Y202-G2,CMY-R160-J
KE94C302
Sub BC controller: CMB-P104,108V-GB,CMB-P1016V-HB
96 + 96
3.4 + 3.4
Acrylic painted steel plate Acrylic painted steel plate
1,160(1,100 without legs) x 880 x 550
Installation Manual
22.9-21.8-21.0
PQRY-P550YSHM-A(For Ground source)
3-phase 4-wire 380-400-415V 50/60Hz
54,200
63.0
13.60
215,000
59,300
5.76 + 5.76
Over-heat protection
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
181(400)
Inverter
AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Inverter
Inverter scroll hermetic compressor
AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Inverter scroll hermetic compressor
6.3
) V 0 4 2 ( 5 3 0 . 0 ) V 0 4 2 ( 5 3 0 . 0
4 . 7
2 3 L E M 2 3 L E M
High pressure sensor, High pressure switch at 4.15MPa (601 psi)
45-11/16(43-5/16 without legs) x 34-11/16 x 21-11/16
Over-heat protection
Over-heat protection, Over-current protection Over-heat protection, Over-current protection
1.0
5.0
1.0 5.0
-
Heat Source Twinning kit: CMY-Q100VBK
22.2(7/8) Brazed -
High pressure
Low pressure
High pressure
Low pressure