#1
- Install the top bracket
with screws provided
Remove the bottom screws
and install the bottom bracket;
reuse the screws taken out.
#2
- Install the Right Side Gable and Left Side Gable
with screws provided at top and bottom sides.
Location of existing cabinet
screws to tie the Safety Cable
(OPTIONAL, not included,to be ordered separately)
#5
-If required secure side blocker (s)
to the side of the wind screen where there
is direct exposure to wind. Use predrilled
holes and screws provided to secure to screen.
NOTE:
Wind Blockers are used to prevent direct wind exposure to the heat exchanger.
Windscreens are needed for the operation where the ambient temperature falls below -5° Celsius.
#4
- Secure Safety Cables to the
Cabinet chassis with existing
cabinet screws (as shown) and
tighten up the 2 screws already
installed on the Front Face Panel
#3
- Install the Front Face Panel
with screws provided.
INSTALLATION PROCEDURE
PFR-12-18_201702
PFR-12-18 (FRONT WINDSCREEN)
