41
Screw holes
Booster heater
Figure3.
Booster heater
Fan base
Sirocco fan
Sirocco fan
Housing assembly
Housing
assembly
Piece
Piece
Leg
Bush
Bush
Motor
Motor base
(Only PEHD-P3,
PEAD-P3)
2
2
. Removing the booster heater
1. Remove the bottom plate, drain pan, and bottom
plate assembly. (Refer
1
-1~3.)
2. Disconnect the booster heater connector from the
controller box.
3. Remove the 2 lower screws on the both sides of
the booster heater.
4. Loosen the 2 upper screws on the both sides of the
booster heater.
5. Removing the booster heater.
Figure4.