Mitsubishi Electric PAR-U01MEDU Smart ME, Инструкция

Страница: 49 / 80

49
Function settings
2
Touch the
[Mode]
button to select one of the
following energy-save control modes that reduces
energy-consumption during vacancy.
The default setting is “Non-use.”
• Non-use: Deactivates the energy-save control
assist function.
• Thermo-off
*1
: Puts the unit into the Thermo-off
state.
• Set temperature offset
*1*2
: Offsets the set
temperature.
• Fan speed down
*3
: Sets the fan speed to “Low.”
• ON/OFF: Turns off the unit.
• Operation mode
*3
: Sets the operation mode to
“Setback.”
*1 When using the energy-save function of other system
controllers in combination with the energy-save control
assist function of the Smart ME controller, do not
select “Thermo-off” or “Set temperature offset.”
*2 When the units are operated in the Fan mode or in the
Setback mode, or when the set temperature setting
is prohibited from the centralized controller, the set
temperature will not be offset.
*3 If the connected indoor unit does not support the fan
speed adjustment function or the Setback mode, these
items will not be displayed.
When the occupancy sensor detects occupancy
during the energy-save control, the original
operating status will be restored.
However, when the operating status is changed
by other controllers or by the scheduled or timer-
controlled events, the current operating status will
be retained even if the occupancy sensor detects
occupancy.
<Note>
• To use the energy-save control assist function in a
system with both main and sub remote controllers,
activate the function only on the remote controller
whose coverage area is the largest.