Mitsubishi Electric PAC-SF44SRA Скачать руководство пользователя

Страница: 10 / 35

(5) LOUVER [Collective Setting/Monitor Screen, Group Setting/Monitor Screen]

1. Start/stop will be repeated each time the LOUVER switch is pressed, and the display will

change as shown below.

1. When operating the louvers collectively, “LOUVER ON” will appear regardless of the

model.

2. If the indoor unit in the group setting is not provided with the louver operation, "

will flicker.

(6) Air Direction

[Collective Setting/Monitor Screen]
1. The display will change as shown below each time the AIR DIRECTION switch is pressed.

When the wind direction is changed collectively, the vane permitted operation and swing

permitted operation are used regardless of the model. The air direction cannot be changed
when controlling only the LOSSNAY.

[Group Setting/Monitor Screen]

1. Each time the AIR DIRECTION

switch is pressed, the display will
change as shown on the right
from the currently displayed air
direction state.

The air direction changeover operation will differ according to the model being controlled.

The air direction cannot be changed for groups controlling only the LOSSNAY, and for
models that do not have a vane. (

will flicker if operated.)

(7) Interlock unit ON/OFF

[Collective Setting/Monitor Screen]
1. The display will change as shown below each time the VENTILATION switch is pressed.

When starting and stopping interlocked units collectively, "INTERLOCK UNIT ON" will turn ON

regardless of the presence of interlocked units.
Interlocked units cannot be started or stopped when controlling only independent indoor units
or independent LOSSNAY units.

[Group Setting/Monitor Screen]
1. Each time the VENTILATION switch is pressed, the display will change as shown below

from the currently displayed interlocked unit ON/OFF state.

The interlocked unit cannot be started or stopped if the group does not have interlocked
units. (

will flicker if operated.)

No display

(OFF)

No display

(OFF)

Содержание PAC-SF44SRA




































Результаты поиска

Содержание PAC-SF44SRA

Отзывы:

Похожие инструкции для PAC-SF44SRA

Бренды по названию

Популярные бренды

Mitsubishi Electric PAC-SF44SRA, Инструкция

Результаты поиска

Содержание PAC-SF44SRA

Отзывы:

Похожие инструкции для PAC-SF44SRA

Бренды по названию

Популярные бренды