Mitsubishi Electric NF250-HEV, Инструкция по эксплуатации, Страница: 49 / 64

48
ENTER
7.1.2-6 Setting method for measurement items
MENU
SETTING MEASURE
ALARM
LCD
ITEM_S
DATE
EP/EQ
MENU
SETTING ITEM_S I
V
P
Q
EP
[ON]
[Setting item selection screen]
[Measurement item
selection screen]
• Select ITEM_S from the setting item selection screen and press ENTER to switch to the measurement item selection screen.
• Switches through I
⇔ V ⇔ P ⇔ Q ⇔ EP ⇔ EQ ⇔ PF ⇔ Hz ⇔ HI （ A ）⇔ HI （ % ）⇔ FREE ⇔ SEQ_CHK ⇔ I ....
● I : Load current
● V : Line voltage
● P : Electric power
● Q : Reactive power
● EP : Electric energy
● EQ : Reactive energy
● PF : Power factor
● Hz : Frequency
● HI (A) : Harmonic current
● HI (%) : Harmonic current
content ratio
● FREE : Free display
● SEQ_CHK : Phase sequence display (*)
ENTER
MENU
ENTER
MENU
MENU
SETTING ITEM_S I
[ON/OFF switch screen]
To [ON/OFF
switch screen]
ON ⇔ OFF
Select with UP/DOWN
ENTER
MENU
Select NO ⇔ YES
with UP/DOWN
Current setting status
[Allow changes screen]
MENU
SETTING ITEM_S I
OK?
NO
YES
ON
OFF
[Default value: All items ON]
• Select I on the measurement item selection screen and press ENTER to switch to the ON/OFF
switch screen. (Screen [1])
Select ON
⇔ OFF to change the setting.
• Press ENTER to display the allow changes screen. Select YES and press ENTER to decide the
setting. (Screen [2])
Other items can be changed the same way.
Screen [1]
Screen [2]
To [Measurement item selection screen]
Select with UP/DOWN
* Only for 400/800 A frame