Mitsubishi Electric NF250-HEV Скачать руководство пользователя страница 38

Страница: 38 / 64

7.1 Operating method for main menu screen

The main menu screen provides access to each display screen. Use the UP/DOWN switches to select a screen to display/set, and then press
ENTER to switch to the selected screen.
* Text will be inverted (black background and white text) when selected.

ENTER

Select this to display and configure protection characteristics.
Refer to 7.1.1.

[Main menu screen]

Select this for settings.
Refer to 7.1.2.

Select this to reset alarms.
Refer to 7.1.3.

Select this to reset fault causes/current, maximum values,

electric energy, and reactive energy.

Refer to 7.1.4.

Select this to check item settings.

Refer to 7.1.5.

PROTECT

SETTING
AL_RST
ERASE
INFO

PROTECT

SETTING

AL_RST
ERASE
INFO

DOWN

ENTER

PROTECT
SETTING

AL_RST

ERASE
INFO

DOWN

PROTECT
SETTING
AL_RST

ERASE

INFO

DOWN

PROTECT
SETTING
AL_RST
ERASE

INFO

[Protection characteristics selection screen]

This is used to check overload, short-circuit protection

characteristics,

current setting, long time delay operating time, short

time delay tripping current, short time delay operating

time, and instantaneous tripping current.

[Settings menu screen]

This is used to set phase switching, demand time limit,

line system settings, pulse unit settings, alarms

settings, LCD settings, time settings, and electric

energy/reactive energy.

[Information screen]

This is used to check item settings for models, the

protection characteristics list, the alarm list, and the

measurement settings list.

Содержание NF250-HEV

































































Результаты поиска

Содержание NF250-HEV

Отзывы:

Mitsubishi Electric NF250-HEV, Инструкция по эксплуатации, Страница: 38 / 64

Результаты поиска

Содержание NF250-HEV

Отзывы: