13-1. MUZ-LN25VG MUZ-LN35VG
NOTE
: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet
(1) Remove the screws fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Disconnect the power supply and indoor/outdoor con-
necting wire and the demand control signal transmis-
sion cable.
(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the screws of the terminal block support and
the back panel.
(10) Remove the back panel.
Photo 2
Photo 1
Photo 3
54
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector has the
locking mechanism.
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
Sleeve
Locking lever
Back panel
Service panel
Screws of the top panel
Screws of the terminal block support and the back panel
Screws of the cabinet
Screws of
the back panel
Screws of
the top panel
Direction to
remove
Screws of the cabinet
Hooks of
the service
panel
<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are 2 types (refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
DISASSEMBLY INSTRUCTIONS
13
Screw of the cabinet
Screw of
the service
panel
OBH767
Содержание MUZ-LN25VG
