16
MICROPROCESSOR CONTROL
9
WIRELESS REMOTE CONTROLLER
Once the operation mode are set, the same operation mode
can be repeated by simply turning the
OPERATE/STOP(ON/OFF) button ON.
Indoor unit receives the signal with a beep tone.
When the system turns off, 3-minute time delay will operate
to protect system from overload and compressor will not
restart for 3 minutes.
9-1. “I FEEL CONTROL” (
) OPERATION
(1) Press OPERATE/STOP(ON/OFF) button on the
remote controller. OPERATION INDICATOR lamp of
the indoor unit turns on with a beep tone.
(2) Select “I FEEL CONTROL”
(
)
mode with the
OPERATION SELECT button.
(3) The operation mode is determined by the room
temperature at start-up of the operation.
RESET
RESET
CLOCK
CLOCK
g
Example
Previous operation
COOL mode of
“I FEEL CONTROL”
or COOL mode
●
Once the mode is fixed, the mode does not change by
room temperature afterwards.
●
Under the ON-TIMER (
) operation, mode is
determined according to the room temperature at set
time the operation starts.
●
When the system is stopped with the
OPERATE/ STOP(ON/OFF) button on the remote
controller, and restarted within 2 hours in “I FEEL
CONTROL”
(
)
mode, the system operates in
previous mode automatically regardless of the room
temperature.
Example
Previous operation
COOL mode of
“I FEEL CONTROL”
or COOL mode
When the system is restarted after 2 hours and more,
the operation mode is determined by the room
temperature at start-up of the operation.
Restart
COOL mode of
“I FEEL CONTROL”
Restart
COOL or DRY or
HEAT mode of “I
FEEL CONTROL” that
is determined by room
temperature at start-up
of the operation.
Indication
Operation state
Difference
between set
temperatuer
and room
temperature
This shows that the air
conditioner is operating
to reach the target temp-
erature.
Please wait until the
target temperature is
obtained.
This shows that the
room temperature is
approaching the target
temperature.
lighting
not lighting
Approx. 2
:
or more
Approx. 2
:
or less
Operation Indicator
OPERATION INDICATOR lamp
The operation indicator at the right side of the indoor
unit indicates the operation state.
MCFH-13NV -
E3
Mode
COOL mode of
"I FEEL CONTROL"
DRY mode of
"I FEEL CONTROL"
HEAT mode of
"I FEEL CONTROL"
Initial room temperature
25
:
or more
23
:
to 25
:
less than 23
:
INDOOR UNIT DISPLAY SECTION
