15
(7) SWING ( ) mode
By selecting SWING mode with VANE CONTROL button, the horizontal vane swings vertically.
(8) Cold air prevention in HEAT operation
The horizontal vane position is set to Upward.
NOTE:
When 2 or more indoor units are operated with multi outdoor unit, even if any indoor unit turns thermostat off,
this control doesn’t work in the indoor unit.
(9) To change the air
fl
ow direction not to blow directly onto your body.
To change the air
fl
ow
direction
When to use this function?
COOL/DRY
HEAT
Pressing and hold-
ing VANE CONTROL
button for 2 seconds
or more, the horizon-
tal vane reverses and
moves horizontal posi-
tion.
Use this function if you
don’t want the air from the
indoor unit to blow directly
onto your body.
• Depending on the shape
of the room, the air may
blow directly onto your
body.
• Press VANE CONTROL
button again to return the
vane to the previously-set
position.
The air conditioner starts
the cooling or drying opera-
tion approx. 3 minutes after
the vane has moved to the
horizontal position.
• When VANE CONTROL
button is pressed again,
the vane returns to the
previously-set position
and the air conditioner
starts the cool or dry
operation in approx. 3
minutes.
The air conditioner starts
heating operation approx. 3
minutes after the vane has
moved to the horizontal
position.
• Sometimes the area
around your feet may
not warm. To warm the
area around the feet, set
the horizontal vane to
(AUTO) or the downward-
blowing position.
• When VANE CONTROL
button is pressed again,
the vane returns to the
previously-set position
and the air conditioner
starts the heat operation
in approx. 3 minutes.
NOTE:
• If you make the air
fl
ow not to blow directly onto your body by pressing VANE CONTROL button, the compressor
stops for 3 minutes even during the operation of the air conditioner.
• The air conditio
ner operates with Very Low speed until the compressor turns on again.
(10) ECONO COOL ( ) operation (ECONOmical operation)
When ECONO COOL button is pressed in COOL mode, set temperature is automatically set 2°C higher.
Also the horizontal vane swings in various cycle.
SWING operation makes you feel cooler than set temperature. So, even though the set temperature is higher, the
air conditioner can keep comfort. As a result, energy can be saved.
ECONO COOL operation is cancelled when ECONO COOL button is pressed once again or VANE CONTROL but-
ton is pressed or changed to other operation mode.
Horizontal
position
Mitsubishi ilmalämpöpumput huoltaa ja korjaa: Jäähdytinpalvelu RefGroup Oy
www.ilmalämpöpumput.com
