Mitsubishi Electric MSZ-FH25VE Скачать руководство пользователя страница 12

En-11

● OPERATING INSTRUCTIONS ●

1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.

•  Wipe with a soft dry cloth or rinse it with water.

•  Do not soak it in water for more than two hours.

•  Dry it well in shade.

3. Install the front panel by following the removal 

procedure in reverse. Close the front panel se-

curely and press the positions indicated by the 

arrows.

Instructions:

 

C

LEANING

•  Switch off the power supply or turn off the breaker before cleaning.

•  Be careful not to touch the metal parts with your hands.

•  Do not use benzine, thinner, polishing powder, or insecticide.

•  Use only diluted mild detergents.

•  Do not expose parts to direct sunlight, heat, or fi re to dry.

•  Do not use water hotter than 50°C.

Air fi lter

• 

 

Clean every 2 weeks

 

•  Remove dirt by a vacuum cleaner, or rinse with water.

•  After washing with water, dry it well in shade.

 Important

• 

Clean  the  fi lters  regularly  for  best  performance  and  to 

reduce power consumption.

• 

Dirty  fi lters  cause  condensation  in  the  air  conditioner 

which  will  contribute  to  the  growth  of  fungi  such  as 

mold.  It  is  therefore  recommended  to  clean  air  fi lters 

every 2 weeks.

• 

Do not touch the i-see sensor.

• 

The air purifying device does not function for safety for 

a couple minutes after the operation starts or the front 

panel is opened/closed.

• 

Do not disassemble the air purifying device.

• 

Do not touch any parts other than the frame of the air 

purifying device.

Front panel

Air cleaning fi lter 

(Electrostatic anti-allergy enzyme fi lter, 

blue)

Every 3 months:

•  Remove dirt by a vacuum cleaner.

When dirt cannot be removed by vacuum cleaning:

• 

Soak the fi lter and its frame in lukewarm water before rinsing it.

• 

After washing, dry it well in shade. Install all tabs of the air fi lter.

Every year:

•  Replace it with a new air cleaning 

  fi lter for best performance.

•  Parts Number 

 MAC-2330FT-E 

Pull to remove from the air fi lter

(Deodorizing fi lter, black)

Every 3 months:

•  Remove dirt by a vacuum cleaner, or soak the framed fi lter in lukewarm 

water  (30 to 40°C) for about 15 minutes. Rinse well.

•  After washing, dry it well in shade.

•  Deodorizing feature recovers by cleaning the fi lter.

When dirt or smell cannot be removed by cleaning:

•  Replace it with a new air cleaning fi lter.

•  Parts Number 

 MAC-3000FT-E 

Air purifying device

Every 3 months:

•  Remove dirt by a vacuum cleaner.

When dirt cannot be removed by vacuum cleaning:

• 

Soak the fi lter together with its frame in lukewarm water and rinse it.

•  After washing, dry it well in shade.

Hole

Hinge

and

SG79F661H02_en.indd   11

2012/12/18 (火)   午後 1:28:26

Содержание MSZ-FH25VE
















Отзывы: