HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU,
TOKYO 100-8310, JAPAN
6. CONNECTING THE INTERFACE/CONNECTOR CABLE TO THE AIR CONDITIONER
Fix the connecting cable at the prescribed position securely. Incorrect installation
PD\FDXVHHOHFWULFVKRFN¿UHDQGRUPDOIXQFWLRQ
WARNING
• Connect the INTERFACE/CONNECTOR CABLE to the Indoor electronic control P.C. board of the air conditioner with the connecting cable.
• Cutting or extending the connecting cable of the INTERFACE/CONNECTOR CABLE results in defects in connecting.
Do not bundle the connecting cable together with power supply cord, indoor/outdoor connecting wire, and/or earth wire. Keep as much distance as possible between the
connecting cable and those wires.
• The thin part of the connecting cable should be stored and placed where customers cannot touch it.
Air conditioner
Thin part of the connecting cable.
Place this part where customers cannot touch it.
7KLFNSDUWRIWKHFRQQHFWLQJFDEOH
Indoor electronic
control P.C. board
CN105 for INTERFACE
CN104 for CONNECTOR CABLE
Connecting
1
Remove the panel and the lower right corner box.
2
Open the covers of the Indoor electronic control P.C. board.
3
Connect the connecting cable to CN105 and/or CN104 on the Indoor electronic control
P.C. board.
4
$WWDFKWKHFDEOHFODPSSURYLGHGZLWK,QWHUIDFHWRWKHWKLFNSDUWRIWKHFRQQHFWLQJFDEOH
ZLWKDVFUHZîDVVKRZQLQWKH¿JXUH
5
3DVVWKHFRQQHFWLQJFDEOHWKURXJKWKHULEDVVKRZQLQWKH¿JXUH
6
Close the covers of the Indoor electronic control P.C. board. Be careful not to catch the
thin part of the connecting cable in the cover. Reinstall the panel and the lower right
corner box.
