Mitsubishi Electric MSY-GS07VF, Руководство по эксплуатации

Страница: 10 / 48

En-9
● OPERATING INSTRUCTIONS ●
S
ELECTING OPERATION MODES
AUTO mode
(Auto change over)
(MSZ-GS only)
The unit selects the operation mode according to the
difference between the room temperature and the set
temperature. During AUTO mode, the unit changes mode
(COOL↔HEAT) when the room temperature is about 2°C
away from the set temperature for more than 15 minutes.
Note:
Auto Mode is not recommended if this indoor unit is con-
nected to a MXZ type outdoor unit. When several indoor
units are operated simultaneously, the unit may not
be able to switch operation mode between COOL and
HEAT. In this case, the indoor unit becomes standby
mode (Refer to table of Operation indicator lamp).
I FEEL mode
(MSY-GS only)
The unit selects the operation mode according to the room
temperature when I FEEL is selected. When the room
temperature is higher than 25°C, COOL is selected (set
temperature: 24°C). When the room temperature is lower
than 25°C, DRY is selected. However, when operation is
stopped and then started within 2 hours, the mode which
has been selected previously is operated.
Note:
During COOL operation, the set temperature may not be
changed when the room temperature is more than 2°C
higher than the set temperature. In this case, please wait
until the room temperature drops to within 2°C of the set
temperature.
COOL mode
Enjoy cool air at your desired temperature.
DRY mode
Dehumidify your room. The room may be cooled slightly.
Temperature cannot be set during DRY mode.
HEAT mode
(MSZ-GS only)
Enjoy warm air at your desired temperature.
FAN mode
Circulate the air in your room.
A5_JG79Y754H01_01En.indd 9 2020/06/02 10:06:57