Mitsubishi Electric MSY-GJ10VA, Руководство по эксплуатации

Страница: 7 / 28

En-6
Front panel
Instructions:
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the above illustration.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the front panel by following the
removal procedure in reverse. Close the
front panel securely and press the positions
indicated by the arrows.
Hole
Hinge
Air cleaning fi lter
(Anti-Allergy Enzyme Filter)
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in luke-
warm water before rinsing it.
• After washing, dry it well in shade.
Install all tabs of the air fi lter.
Every year:
• Replace it with a new air cleaning
fi lter for best performance.
• Parts Number MAC-408FT-E
What is “Nano platinum fi lter”?
Nano platinum is a ceramic particle that includes a platinum nanoparti-
cle. The particles are incorporated into the fi lter material, which results
in providing semi-permanent antibacterial and deodorizing characteris-
tics for the fi lter. Nano platinum surpasses the catechin (a biofl avonoid
that is found in green tea) in performance. Nano platinum fi lter uses this
compound not only to improve air quality but also to eliminate bacteria
and viruses. This air fi lter has a semi-permanent lasting effect even after
washing it with water.
Pull to remove from the air fi lter
Air fi lter (Nano platinum fi lter)
•
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
C
LEANING
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fl ames to dry.
• Do not use water hotter than 50°C.
Important
• Clean the fi lters regularly for best performance and to
reduce power consumption.
•
Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
Hold the tab
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
1
Turn the horizontal vane upward.
Then, remove it as shown in
➀
and
➁
.
2
Swing out the two vertical vanes
one by one.
4
Put the vertical vanes back to
their original positions correctly
one by one, into their respective
guide.
• Push the vanes until they click into place.
3
Clean the air outlet and fan.
• Wipe with a soft dry cloth.
5
Install the horizontal vane by
following the removal procedure
in reverse.
• If the horizontal vane is not installed cor-
rectly, all LED lamps blink when power is
turned on.
2
1
Unlock
Guide
Note:
Do not apply excessive force to the fan or fan
guard.
JG79A732H01_en.indd 6 2013/01/18 (金) 午前 10:13:17