Select the operation mode by pressing the
button.
Each time the button is pressed,the operation mode is changed
is sequence,from (I FEEL...), (COOL), (DRY)to (FAN).
MANUAL OPERATION (COOL,DRY,FAN)
33
With this operation mode,the
temperature and airflow direction
can be finely adjusted by
selecting the operation mode.
The details displayed on the indoor unit
are the same as those in the "I FEEL...".
See page31.
Press the
button.
To select the"COOL","DRY"OR"FAN"MODE
When the ambient temperature is too high,the room temperature
may not reach the set temperature since the unit operates to
cool at high load.
NOTE
IN "DRY" OPERATION
The temperature control (temperature setting) cannot be
done.
The room temperature is slightly lowered in this operation
mode.
To stop operation:
●
Press the
button.
After the operation mode is set once,the operation starts in the
mode set previously from the next time by simply pressing the
button.
When the set temperature is to be changed:
Press the button to lower the temperature.
One press lowers the temperature by about 1
℃.
Press the button to raise the temperature.
One press raises the temperature by about 1
℃.
2
1
