Mitsubishi Electric Mr. Slim PLA-ZM EA Series, Руководство по эксплуатации

Страница: 10 / 248

8
en
Outlet No. 2
Outlet No. 3
Outlet No. 1
Outlet No. 4
3. Operation
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
Select “Vane·Louver·Vent.
(Lossnay)” from the Operation
menu, and press the [SELECT]
button.
Press the [F1] or [F2] button to go
through the vane setting options:
“Auto,” “Step 1,” “Step 2,” “Step
3,” “Step 4,” “Step 5,” and “Swing.”
Select the desired setting.
Auto
Auto Step 1 Step 2
Step 3 Step 4 Step 5
Swing
Swing
Select “Swing” to move the vanes
up and down automatically.
When set to “Step 1” through “Step
5” , the vane will be fixed at the
selected angle.
Press the [F3] button to go through
the ventilation setting options in the
order of “Off”, “Low”, and “High”.
* Settable only when LOSSNAY
unit is connected.
Off Low High
Off Low High
• The fan on some models of indoor
units may be interlocked with
certain models of ventilation units.
Press the [RETURN] button to go
back to the Operation menu.
Remote controller setting
The airflow direction of this outlet
is controlled by the airflow direc -
tion setting of remote controller.
Fixed
The airflow direction of this outlet is fixed
in particular direction.
* When it is cold because of direct
airflow, the airflow direction can be
fixed horizontally to avoid direct airflow.
Notes:
●
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
●
Available directions depend on the type of unit connected.
●
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in “STAND BY” or “DEFROST” states.
2. Immediately after starting heat mode (while the system is wait -
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem -
perature setting.
< How to set the fixed up/down air direction >
For PLA-EA series, only the particular outlet can be fixed to certain direc -
tion with the procedures below. Once fixed, only the set outlet is fixed
every time air conditioner is turned on. (Other outlets follow UP/DOWN air
direction setting of remote controller.)
Note:
This function cannot be set depending on the outdoor unit to be
connected.
■
Explanation of word
• “Refrigerant address No.” and “Unit No.” are the numbers given to
each air conditioner.
• “Outlet No.” is the number given to each outlet of air conditioner.
(Refer to the illustration below.)
• “Up/Down air direction” is the direction (angle) to fix.
Horizontal airflow
Note:
The outlet No. is indicated by the number of grooves on both
ends of each air outlet. Set the air direction while checking the
information shown on the remote controller display.
Air outlet identification marks
Select “Operation” from the Main
menu (refer to 3.5.1), and press the
[SELECT] button.
Operation
Main Main menu
F1 F2 F3 F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
<Vane setting>
Fri
Swing Off
Vent. Vane
F1 F2 F3 F4
<Vent. setting>
Fri
Low
Vent.
F1 F2 F3 F4
<Returning to the Main menu>
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
RG79F156H03_EN.indd 8 2019/04/17 9:38:05