6
Each air conditioner has its own refrigerant address No. and unit No.
(Example below).
To find air conditioner No. to set, refer to the procedures below.
Air conditioner No. is found by its airflow direction with the unit No.
changed one after the other.
How to find air conditioner No.
Check from refrigerant address 00 at first.
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.4 and check
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.4 and check
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.4 and check
Change to unit No.1 and check
Change to unit No.2 and check
Change to unit No.3 and check
Change to unit No.4 and check
When “Err” is displayed, refrigerant address
does not heve further “unit No.”.
Change to the next “refrigerant address No.”.
(Refrigerant No “00”~max. No.“15”)
<Process to find air conditioner No.>
[1] To check refrigerant address No. and unit No.
1. Press Mode button (Return button) and unit No. or refrigerant
address No. blinks.
Adjust refrigerant address No.to “00” and unit No.“1” with Set
Temperature button .
. Press Filter button to send the information on wired remote
controller.
3. Wait for 15 seconds . How does the air conditioner run?
Only air from the outlet which No. displayed on wired remote
controller blows downward.
Refrigerant address No.00 and unit No.1 are the air conditioner No..
All outlets are closed.
Go to step [].
[2] To check by changing unit No. one after the other
(Maximum unit No. is 4)
1. Press Mode button (Return button) and unit No. blinks.
[3] To check Unit No. of following refrigerant address No.(Maxmum
refrigerant address No. is 15)
1. Press Mode button (Return button) to blink refrigerant address No..
Adjust refrigerant No. with Set Temperature button .
* By changing refrigerant address, unit No. and outlet No. turn to initial
display.
. Go back to [] and check Unit No. again from Unit No. 1 in order.
To clear fixed setting
To clear all fixed setting(reset to factory default), press
check button(clear
botton)
for wired more than 3 seconds in fixed airflow direction mode.
Display of wired remote controller blinks and the set information is
cleared.
Note:
This operation clears the fixed setting information of all air
conditioner connected to the wired remote controller.
Outlet No. Up/Down air direction
Refrigerant addres No.
Unit No.
Outlet No.
Up/Down air direction Refrigerant addres No.
Unit No.
Err
Outlet No.
Up/Down air direction Refrigerant addres No.
Unit No.
Adjust to the next unit No. with Set Temperature button .
(refrigerant address No. 00 is remained.)
. Press Filter button to send the information on wired remote
controller.
3. Wait for 15 seconds . How does the air conditioner run?
Only air from the outlet which No. displayed on wired remote controller
blows downward.
No. displayed in wired remote controller is air conditioner
No. (Checking completed).
All outlets are closed.
Repeat [1] and check. (If all the numbers are checked up to No.4
and is not found, go to [3].)
“Err” is displayed on wired remote controller.
The refrigerant address does not have further unit No.. (Go to [3].)
3.5. Ventilation
For LOSSNAY combination
The following patterns of operation is available.
• Run the ventilator together with the indoor unit.
• Run the ventilator independently.
Note: (for IR wireless remote controller and RF thermostat)
Running the ventilator independently is not available.
No indication on the remote controller.
3. Operation
Refrigerant
address
No. “00”
As for this air conditioner,
air conditioner No. is “Unit No.1”
of refrigerant address “0”.
Wired remote controller
Refrigerant
address
No. “01”
Unit No. “1”
Unit No. “”
Unit No. “1”
Unit No. “”
01_RG79D307H02_EN.indd 6
2010/09/01 10:45:59
