Mitsubishi Electric Mr.Slim PK36FK, Техническое и сервисное руководство, Страница: 48 / 80

48
10
SYSTEM CONTROL
1
Group control with
a single remote
controller
(See page 49.)
Unit
Remote
controller
Unit Unit
Many units, installed at different locations, can be started
and controlled with a single remote controller. The remote
controller can be mounted in a different location using a
non-polar two-wire cable, which can be extended up to
500m. A maximum of 50 units can be controlled with a
single remote controller. All units operate in the same
mode.
2
Control using two
remote controllers
(See page 50.)
Unit
Remote
controller
Unit Unit
Two remote controllers can be used to control either one
unit or a group of units. Units can then be controlled from
a distance or at close range. Units operate according to
the latest command from either remote controller.
3
Individual control
by grouping
remote controllers
(See page ##.)
Unit
Remote
controller
Unit Unit
By grouping the remote controllers in one place, several
units installed at different locations can be controlled indi-
vidually, and operation conditions of all units are visible
without a special control board. The control method is the
same as that of the single unit with a single remote con-
troller.
4
Multiple remote
control display
(See page ##.)
✽
Multiple display
adapter
(PAC-SA88HA-E)
is needed.
Unit
Remote controll
display board
Remote
controller
Unit Unit
Several units can be controlled with a remote control dis-
play board. Operation conditions of all the units are visi-
ble with the remote control display board.
Individual control by each remote controller is also possi-
ble.
1. VARIETY OF SYSTEM CONTROL FUNCTIONS
OC121--2.qxp 24/6/97 2:18 AM Page 48