manualshive.com logo in svg

Mitsubishi Electric Mr.SLIM PCA-RP KAQ, Руководство по эксплуатации

Поделиться
Скачать
Mitsubishi Electric Mr.SLIM PCA-RP KAQ Скачать руководство пользователя страница 16

16

ON/OFF

TEMP.

C

C

FILTER

■

 

Indicates that the filter needs cleaning.

 

Ask authorized people to clean the filter.

■

 

When resetting “FILTER” display

  When the [FILTER] button is pressed 2 times successively after 

cleaning the filter, the display goes off and is reset.

Note:

●

 

When 2 or more different types of indoor unit are controlled, the cleaning 

period differs with the type of filter. When the master unit cleaning period 
arrives, “FILTER” is displayed. When the filter display goes off, the cumu-
lative time is reset.

●

 

“FILTER” indicates the cleaning period when the air conditioner was used 

under general indoor air conditions by criteria time. Since the degree of 
dirtiness depends on the environmental conditions, clean the filter accord-
ingly.

●

 

The filter cleaning period cumulative time differs with the model.

●

 

This indication is not available for wireless remote controller.

►

 Cleaning the filters

• Clean the filters using a vacuum cleaner. If you do not have a vacuum clean-

er, tap the filters against a solid object to knock off dirt and dust.

• If the filters are especially dirty, wash them in lukewarm water. Take care to 

rinse off any detergent thoroughly and allow the filters to dry completely 
before putting them back into the unit.

 Caution:

• Do not dry the filters in direct sunlight or by using a heat source, such as an 

electric heater: this may warp them.

• Do not wash the filters in hot water (above 50°C), as this may warp them.
• Make sure that the air filters are always installed. Operating the unit without 

air filters can cause malfunction.

 Caution:

• Before you start cleaning, stop operation and turn OFF the power supply.
• Indoor units are equipped with filters to remove the dust of sucked-in air. 

Clean the filters using the methods shown in the following sketches.

 Filter removal

 Caution:

• In removing the filter, precautions must be taken to protect your

eyes from dust. Also, if you have to climb up on a stool to do the
job, be careful not to fall.

• When the filter is removed, do not touch the metallic parts inside

the indoor unit, otherwise injury may result.

9. Care and Cleaning

Содержание Mr.SLIM PCA-RP KAQ




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды