background image

5

Before using the unit

CAUTION

Do not cover an air outlet or 
air intake with laundry, cloth, 
curtain, etc.

This results in poor ventilation and 
may 

cause heat generation/fi re

.

Do not put vases or any other objects 
fi lled with water on the unit.

Water may leak into the unit adversely 
affecting electric insulation and 

cause 

electric shock and/or fi re

 by short-circuiting.

Do not use the unit in a 
bathroom or other 
location where it is likely 
to come into contact with 
water, or wash it with water.

Exposure to water may 

result in fi re or 

electric shock

 caused by an electric leak.

Do not use the unit where it 
may be exposed to direct 
sunlight or other weather 
conditions.
(This unit is for indoor use only.)

This may 

cause overheating, electric shock 

and/or fi re

 caused by an electric leak.

Do not use the unit in narrow, 
enclosed places such as 
inside closets, between 
pieces of furniture, etc.

This results in poor ventilation and may 

cause 

heat generation and/or fi re

.

Do not use combustion 
appliances in the path 
of the air outlet.

This may 

cause incomplete 

combustion 

in the appliance.

Do not use the unit in places that may be 
subject to oil or fl ammable gas leakage.

Such a leak around the unit may 

cause 

combustion and fi re

.

Do not use the unit in places where 
chemicals are used (such as hospitals, 
factories, laboratories or beauty salons). 

Chemicals and solvents evaporated in the 
air may harm the unit and cause water in 
the tank to leak, 

resulting in damage to 

property

.

Do not use the unit for 
special purposes, such 
as preservation of food, 
art or scientifi c works. 

This may 

negatively affect the quality 

of the 

items stored.

Do not point airfl ow from the unit directly at 
the body for a prolonged period of time.

Be especially careful when 
using the unit where there 
is someone who is unable 
to adjust the humidity 
(infant, child, or elderly 
person). 

If air-fl ow is directed at 
the body for long periods, it may 

harm one’s 

physical condition and lead to dehydration

.

Do not stand on, sit on or lean against 
the unit.

The unit may tip over 

causing injury.

 

Do not remove the Styrofoam 
from the fl oating element.

The fl oating element will not 
be able to detect a full tank 
resulting in water leakage, 

which may damage surrounding objects 
or cause electric shock and/or an electric 
leak

.

Do not drain water continuously if 
there is a possibility that temperature 
around the hose could drop to 
freezing point.

Water inside the hose may freeze and 
prevent the water in the tank from fl owing 
out. The water may leak from the unit and 

damage surrounding objects

.

Install the unit in a location where the 
fl oor is fl at and stable.

If the unit falls over, the water collected in the 
water tank may leak 

damaging surrounding 

objects and in turn result in fi re or electric 
shock caused by an electrical leak

.

Before moving the unit always switch 
it off, unplug it and remove water 
from the water tank.

Moving the unit with water in its tank may 
cause the water to leak and 

damage the 

surrounding objects and in turn result in 
electric shock and/or an electric leak

.

Grasp the plug and remove 
from the power socket.

When removing the plug from the 
power socket, do not pull on it 
diagonally or by the cord as this may 
cause the projections/wiring to be damaged 

resulting in a short circuit, electric shock or 
fi re

.

Before cleaning the unit, wait 
until the blower fan stops 
after operation has stopped, 
and then remove the power plug.

When the unit is on, the internal fan rotates at high 
speeds and may 

cause injury

.

EE

e̲mj̲ez6cx̲s1.indb   5

e̲mj̲ez6cx̲s1.indb   5

2010/05/17   10:28:14

2010/05/17   10:28:14

Содержание MJ-EZ6CX-S1-IT

























Отзывы: