Mitsubishi Electric MJ-E14EG-S1-IT, Руководство по обслуживанию

Страница: 30 / 39

30
(13) Removing and replacing the louvre assembly
①
Remove the front casing. → (See (3)
Removing the front casing)
②
Remove the operation control board from
the louvre assembly. → (Removing and
replacing the operation control board)
③
Remove the top cover set screws (2) from
the louvre assembly, and remove the top
cover.
④
Remove the gear holder set screws (3),
and remove the gear holder.
⑤
Remove the gear and the stepping motor.
⑥
Remove the sleeve G1 set screws (2), and
remove the sleeve G1.
⑦
Remove the top casing and the louvre
assembly.
If the louvre U assembly is in the way,
push out the shaft louvre with a narrow
rod ( 1 to 3), and remove the louvre U
assembly.
⑧
Gently open both ends of louvre CY-2 and
louvre CY-3, and remove the louvre.
Remove the MOVE EYE set screw (1),
release the left and right CY-1 louvre
catches, and remove the louvre while
pulling out the
fi n shaft.
⑨
Remove the louvre CY-N linked fi ns joint,
and remove the linked fi ns.
⑩
Remove the mount MS set screw(1), and
remove the mount MS.
⑪
Remove the stepping motor set screws
(2), and remove the stepping motor.
⑫
Remove the MOVE EYE set screw (1),
and remove the MOVE EYE.
Top cover set screws(2)
③ ④
⑤ ⑥
⑦ ⑧
⑩
⑫
⑨
Gear holder
Gear holder set screws(3)
Gear
Stepping motor
Sleeve G1 set screws(2)
Top casing
Louvre
CY-2 Louvre
CY-3 Louvre U
assembly
Louvre assembly
Link fi n
Louvre CY-N
Mount MS set screw(1)
Stepping motor
set screws(2)
MOVE EYE
set screw(1)
⑪
Louvre
CY-1 Louvre
CY-N