14
Interlocked ventilation group operation
Switch ventilation unit operation by clicking the Ventilation button. (Hi/Lo/Stop)
When ventilation group interlock is set, ON/OFF operation also performs ventilation group Hi/Lo/OFF switching.
(Whether or not there is a ventilation group interlock setting depends on the function setting.)
*Ventilation group does not have this function.
Local remote control operation Prohibit/Permit
When Prohibit On/Off is selected, On/Off operation cannot be performed from the local remote controller.
When Prohibit Mode is selected, the mode cannot be changed from the local remote controller.
When Prohibit Set Temp. is selected, the temperature cannot be changed from the local remote controller.
When Prohibit Filter Reset is selected, filter reset cannot be performed from the local remote controller.
When Unchange is selected, Prohibit/Permit remains in the current state.
(For ventilation group, only On/Off and Filter Reset can be prohibited and permitted.)
Select OK or Cancel
At the end of each setting, click the OK button.
OK:
Accepts the changes and returns to the monitor/operation screen.
Cancel: Ignore the changes and returns to the monitor/operation screen.
(4) Other functions
The following are displayed on Floor screen of the monitor/operation screen:
- Long name
- Operation block name
- Charge block name
[Procedure]
1) Select Monitor/Operation
When the Monitor/Operation function select button is clicked, the moni-
tor/operation screen opens.
2) Select floor display
When the Floor display unit button is clicked, the floor display screen
opens.
3) Select group
When the group item of the group whose names are to be displayed is
clicked, a menu appears.
4) Select the name to be displayed
When Long name, Operation block name, or Charge block name is select-
ed from the menu, the names are displayed.
5) Select OK
After checking the names, click the OK button.
Note:
- For floor batch, whole building batch, and block setting, wind velocity, vane, louver, and interlock ventilation operations
cannot be performed. Perform these operations for each group.
- The range over which each setting can be changed depends on the contents set by the indoor unit & ventilation func-
tion setting of the system configuration settings. For a detailed description of the setting contents, refer to Site
Adjustment manual section 8.5.9 Indoor Unit and Ventilator Function Settings.
❈
The set contents can be checked by System display. (For the detailed operating instructions, see chapter 10.
System Display.)
- When the wind direction is set to downwards, the indoor unit control may automatically change it to another direction.
Note:
- When the setting is different for each group at floor batch, whole building batch, and block processing, the initial value
is Unchange.
- In the case of K control models, if even one of ON/OFF, mode or set temperature is prohibited, the other settings are
also prohibited. Filter reset can not be prohibited.