manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-F FX5UC Series, Руководство пользователя

Серия программируемых контроллеров Mitsubishi Electric MELSEC iQ-F FX5UC - это надежные и эффективные устройства для автоматизации процессов. На нашем сайте вы можете скачать бесплатно Руководство пользователя для этого продукта. Посетите manualshive.com, чтобы скачать руководство по эксплуатации.

Поделиться
Скачать
background image

14

[PRÉCAUTIONS D'INSTALLATION]

ATTENTION

●

Ne pas toucher directement les pièces conductrices du produit. Si cette précaution n'est pas 
respectée, le module risque de ne plus fonctionner ou de ne plus fonctionner correctement.

●

Lors du perçage de trous pour le passage de vis ou de câbles, veiller à ce que les débris de coupe et 
de câbles n'entrent pas dans les grilles de ventilation de l'automate programmable. Si cette 
précaution n'est pas respectée, un départ de feu, des pannes de l'équipement ou des 
dysfonctionnements peuvent survenir.

●

Si une feuille anti-poussière est fournie avec le produit, celle-ci doit être fixée aux grilles de ventilation 
avant l'installation et avant tout câblage pour éviter l'introduction de corps étrangers, tels que des 
copeaux et des débris de câblage.
En revanche, une fois l'installation terminée, la feuille doit être retirée pour que l'air puisse circuler via 
les grilles de ventilation. Si cette précaution n'est pas respectée, un départ de feu, des pannes de 
l'équipement ou des dysfonctionnements peuvent survenir.

●

Placer le produit sur une surface plane. Si la surface de montage est irrégulière, la carte PC va être 
soumise à une force excessive, ce qui va entraîner des non-conformités.

●

Assurer une fixation sécurisée du produit en utilisant un profilé DIN ou des vis de fixation.

●

Raccorder la carte d'extension et l'adaptateur d'extension à leurs connecteurs respectifs de manière 
sécurisée. Si les composants ne sont pas assez serrés, cela peut entraîner un dysfonctionnement du 
module.

●

Fixer la carte d'extension à l'aide de vis taraudeuses. Pour le couple de serrage, suivre les 
spécifications indiquées dans le manuel. Si la plage de couple spécifiée n'est pas respectée pour le 
serrage des vis (vis trop/pas assez serrées), cela peut entraîner des problèmes de raccordement et 
des dysfonctionnements.

●

La prudence est de rigueur lors de l'utilisation d'un tournevis pour l'installation du produit. Si cette 
précaution n'est pas respectée, le produit risque d'être endommagé ou des accidents peuvent se 
produire.

●

Brancher les rallonges, les câbles périphériques, les câbles d'entrée/de sortie et le câble de 
raccordement de la batterie sur leurs connecteurs respectifs de manière sécurisée. Si les composants 
ne sont pas assez serrés, cela peut entraîner un dysfonctionnement du module.

●

Si l'utilisation d'une carte mémoire SD est prévue, l'insérer dans la fente dédiée. Vérifier que la carte a 
bien été poussée à fond dans la fente. Tout mauvais contact peut être source de dysfonctionnements.

●

Couper l'alimentation de l'automate programmable avant de brancher ou de débrancher les appareils 
suivants. Si cette précaution n'est pas respectée, l'équipement risque de ne plus fonctionner ou de ne 
plus fonctionner correctement.
-

Appareils périphériques, carte d'extension, adaptateur d'extension et adaptateur de conversion de 
connecteur

-

Modules d'extension, module de conversion de bus et module de conversion de connecteur

-

Batterie

●

Maintenir le connecteur du câble Ethernet en position droite lors de son installation ou de son retrait. 
Si le câble est retiré alors qu'il était branché au module, le module ou le câble peut être endommagé, 
ou un dysfonctionnement peut se produire en raison d'un problème de contact du câble.

Содержание MELSEC iQ-F FX5UC Series



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-F FX5UC Series

Gardena Master Operator'S Manual preview
Master
Бренд: Gardena Страницы: 18
Danfoss VLT Micro Drive FC 51 Series Quick Manual preview
VLT Micro Drive FC 51 Series
Бренд: Danfoss Страницы: 23
National Instruments PXIe-4340 User Manual preview
PXIe-4340
Бренд: National Instruments Страницы: 31
National Instruments NI 9882 Operating Instructions Manual preview
NI 9882
Бренд: National Instruments Страницы: 24
National Instruments SCXI SCXI-1102 User Manual preview
SCXI SCXI-1102
Бренд: National Instruments Страницы: 85
National Instruments SCXI SCXI-1102 Application Note preview
SCXI SCXI-1102
Бренд: National Instruments Страницы: 10
National Instruments PXIe-4353 Calibration Procedure preview
PXIe-4353
Бренд: National Instruments Страницы: 16
National Instruments PXIe-6591R User Manual preview
PXIe-6591R
Бренд: National Instruments Страницы: 98
National Instruments CompactRIO cRIO-9002 Operating Instructions Manual preview
CompactRIO cRIO-9002
Бренд: National Instruments Страницы: 21
National Instruments cDAQ-9133 User Manual preview
cDAQ-9133
Бренд: National Instruments Страницы: 145
National Instruments cRIO-9039 User Manual preview
cRIO-9039
Бренд: National Instruments Страницы: 42
National Instruments cDAQ-9132 Safety, Environmental, And Regulatory Information preview
cDAQ-9132
Бренд: National Instruments Страницы: 8
National Instruments PXIe-5693 Calibration Procedure preview
PXIe-5693
Бренд: National Instruments Страницы: 54
Wang 2236 Product/Maintenance Manual preview
2236
Бренд: Wang Страницы: 68
NAVITAS TSE Series Installation Manual preview
TSE Series
Бренд: NAVITAS Страницы: 14
TCi 18055 Manual preview
18055
Бренд: TCi Страницы: 9
Jäger ADwin HSM-24V Manual preview
ADwin HSM-24V
Бренд: Jäger Страницы: 18
Mitsubishi AL-ASI-BD Hardware Manual preview
AL-ASI-BD
Бренд: Mitsubishi Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды