Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/D, Руководство пользователя

Страница: 96 / 202

94
6 WIRING
6.2 Cable Connecting Procedure
Wire end treatment
Crimp terminal size differs depending on terminal screw size and wiring methods used.
• Use crimp terminals of the following sizes.
■
M3 terminal screw
• When a single wire is connected to a single terminal
<Reference>
• When two wires are connected to a single terminal
*1
<Reference>
*1 To adapt the LVD directive (EN61010-2-201:2013) of the EC directive, avoid the wiring with two wires to the built-in terminal, and take an
appropriate action such as adding an external terminal.
For the time of compliance with the LVD directive (EN61010-2-201:2013), refer to

Page 151 Requirement for Compliance with LVD
directive.
■
M3.5 terminal screw
• When a single wire is connected to a single terminal
• When two wires are connected to a single terminal
Terminal manufacturer Type No. Applicable cable Certification Pressure bonding tool
JST Mfg. Co., Ltd. FV1.25-B3A AWG22 to 16 UL Listed YA-1
(JST Mfg. Co., Ltd.)
FV2-MS3 AWG16 to 14
Terminal manufacturer Type No. Applicable cable Certification Pressure bonding tool
JST Mfg. Co., Ltd. FV1.25-B3A AWG22 to 16 UL Listed YA-1
(JST Mfg. Co., Ltd.)
Terminal
Terminal screw Crimp terminal
6.2 mm
or less
φ
3.2
6.2 mm
or less
φ
3.2
Terminal
φ
3.2
6.3 mm
or more
φ
3.2
Terminal screw Crimp terminal 6.2 mm
or less
6.2 mm
or less
6.3 mm
or more
Terminal
Terminal screw Crimp terminal
6.8 mm
or less

3.7

3.7
6.8 mm
or less
Terminal

3.7
6.0 mm
or more
6.0 mm
or more

3.7
Terminal screw Crimp terminal 6.8 mm
or less
6.8 mm
or less