20
OPERATING PROCEDURE
PHOTOS
3. Removing the indoor heat exchanger.
(1) Remove the grille. (Refer to 1(1) (2).)
(2) Remove the screws on both side and in front of the front
panel. (Photo 5)
(3) Remove the screws of the nozzle assembly. (Photo 6)
(4) Remove the electronic box. (Refer to 1.)
(5) Remove the indoor fan motor. (Refer to 2.)
(6) Remove the screws of the motor support.
(7) Remove the fan casing. (Iower)
(8) Remove the insulation of the drain pan and remove the
screws. (Photo 7)
(9) Remove the screws under the drain pan. (Photo 8)
(10) Remove the drain pan.
(11) Remove the indoor heat exchanger.
Photo 5
Photo 6
Photo 7
Photo 8
Screws
Insulation and screws
Screws
Screws
2. Removing the indoor fan motor
(1) Remove the grille. (Refer to 1(1) (2).)
(2) Remove the fan casing.(upper)
(3) Disconnect the connector of the indoor fan motor.
(4) Disconnect the ground wire of the fan motor.
(5) Remove the screws of the motor band and remove the
catch.
(6) Take out the sirocco fan and the indoor fan motor.
Photo 4
Fan casing
(upper)
Indoor fan motor
Screws
Fan
casing(upper)
Motor band
OB344A--1.qxp 04.6.14 1:04 PM Page 20