ERR
NET
MODE
UNIT
RESET
MODE
13
Option 2 - WPS-Push Pairing
• Please Note: The WPS and Router reset buttons may be similar on some
Routers.
• Please exercise caution as resetting your Router will erase network
configuration.
3
5
7
4
6
8
Check Wi-Fi and WPS are enabled
on your Router. The connection
procedure varies depending on your
Router – refer to your Router’s manual
for more information.
Activate WPS on your Wi-Fi interface
by using a small object to press and
hold the MODE Button for 2 seconds.
When pairing process is completed on
the Wi-Fi interface, the NET LED lights
up solid green for 5 seconds.
Activate WPS Mode on your Router.
This will be enabled for a set period
allowing approximately 2 minutes
to complete the next step. To do so,
please refer to your Router’s manual.
When WPS-Push is enabled on the Wi-
Fi interface, MODE LED starts flashing
orange (every second).
If ERR LED lights up orange for 5
seconds at any stage, there may be a
problem; please start process again.
ERR
NET
MODE
UNIT
RESET
MODE
ERR
NET
MODE
UNIT
RESET
MODE
