10
Insert the clip into the holder until it clicks
into place.
Slip the clip over the edge of corner box to fix
the interface unit .
Note:
Mount the interface unit on the
underside of the indoor unit if it cannot be
mounted on the side of the indoor unit.
Insert the interface unit into the holder until
it clicks into place.
Note:
When inserting the interface unit into
the holder, align the cable of the interface unit
with the mark for the cable on the holder .
1
3
2
4
2
Clip
Holder
Interface unit
Mark for cable
Align
Holder
Connecting cable
Interface
unit
Corner box
Clip
1
Indoor unit
Indoor unit
Corner box
Corner box
Underside of the
indoor unit
Side of the
indoor unit
Example of mounting on the left side of the indoor unit
Otherwise, light leakage or degradation in
appearance may result.
Note:
Interface unit can also be mounted on
the right side of the indoor unit.
To check the LED indication after setup, remove
the interface unit from the holder .
Run the connecting cable in the space on the
back of the unit as shown in the above image.
Tuck cabling away and secure it.
Note:
Make sure that the connecting cable will
not get caught on or between the installation
plate and the wall, or between the indoor unit
and the installation plate. Failure to do so may
cause damage to the connecting cable resulting
in communication problems.
Make sure that the connecting cable will not
come out from the indoor unit.