17
17
Heat if Room Drops Below Set Minimum Temperature
1.
Select ‘Heat if room drops below set minimum
temperature’ under ‘Add a rule’
2.
Choose what time period you would like the rule to run.
By default it is set at 9pm to 7am. Note that the 7am is the
following day.
3.
Set a minimum room temperature limit – the heat pump
will automatically turn on if the room/zone falls below
this temperature. By default this is 10°C. You may set this
between 0°C and 25°C.
4.
Next, select which days you would like this rule to run. By
default all days are selected.
5.
Lastly select ‘Add’ to add this rule to your rule set.
*Please note, your heat pump/air conditioner must be off for
min./max. rules to apply.
Zones will not be changed.
Open Lounge and Bedroom 1
zone and close off all others.
Zone Control
Should your Wi-Fi Control be connected to a compatible
ducted system and zone controller you will have a further
setting.
You can select to change the zone settings with this rule, or
to leave the zones unchanged/what they were previously set
to.
When actioned, Wi-Fi Control will ensure comfort is delivered
only to where it is needed most, closing off/opening up
zones as required and ensuring energy is not wasted on
vacant area/zones.
Zones now displaying a tick beside them will be opened
(Zones displaying an eye symbol
are zones which are not
visible for operation – if one of these zones is selected for this
rule to apply, it will still open and will cause an over-ride and
this zone will be displayed in the heat pump control screen).
Important
When minimum / maximum temperature rules are set, zones
will remain as per the rule settings.
Select “Add” to add this min.
temp rule to rule set.
Содержание MAC-558
Страница 1: ...USER MANUAL ...
