1
3
2
4
5
12~13
＋
−
＋
−
1
2
3
Caution
8
Preparation
Setting the filters
Remove the plastics from the HEPA filter and the
activated charcoal filter before use.
Press the grill-release buttons, and
then remove the intake grill.
Remove the HEPA filter.
Both sides
Remove the Plasma unit.
Hold the spring
clips, and remove
one side at a time.
Hold with both
hands, and pull
to remove.
Install the activated charcoal filter.
Remove the
plastic before
installing.
Replace the Plasma unit, the HEPA
filter, and the intake grill.
Remove
the plastic
(White particles within the activated
charcoal filter are titanium oxide, not
mildew.)
Installing the batteries for
the remote controller
While pushing the cover, slide it
forward.
Insert the batteries.
Close the cover by sliding it backward
until it snaps shut.
Two AA type batteries
●
Ensure that the proper polarity is observed.
Use dry cell batteries in a proper manner.
●
Do not use rechargeable batteries.
●
Make sure that the positive and negative poles
are correctly aligned.
●
When replacing, always replace with two new
batteries of the same type.
●
Should your skin come in contact with the
electrolyte of the alkaline dry cell batteries,
wash the affected area with water. Should the
electrolyte enter your eye, immediately contact
a doctor.
Wrong use may cause
injury
or
malfunction
.
